Go To...

Filter skins for a Tenere

Home › Forums › Yamaha Bikes › Yamaha Bikes › Filter skins for a Tenere

This topic contains 10 replies, has 0 voices, and was last updated by  Nick Jackson 13 years, 11 months ago.

Log In Register Lost Password
Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • December 6, 2011 at 7:59 pm #100794

    Angus Stainlay
    Member

    I have seen a thread showing filter skin retention on OB here somewhere.
    Question is – anybody know where you can buy filter skins for the Tenere?

    Thanks
    Angus

    December 6, 2011 at 8:18 pm #212768

    Nick Jackson
    Member

    I use pool filter skins from Coles , 5 for $6 and they work perfectly. :)

    December 6, 2011 at 8:24 pm #212775

    Nick Jackson
    Member

    Here’s the post on an easy mod for a filter skin

    Filter skin mod 

    Remove existing filter cover bolts and disregard. 
    Remove standard filter cover. 
    Cut 4 pieces of threaded rod about 35-40mm long. 
    Loctite studs into airbox in place of cover bolts. 
    Fit DNA filter cover over the studs and secure with nuts. 

    b581e698.jpg

    64abda96.jpg

    a97cefcc.jpg

    Buy a pool filter sock ( $6 for 5 from Coles).
     Oil filter sock

    2831efc4.jpg

    Take standard filter cover 

    01c2b503.jpg

    Fit filter sock over filter cover

    ecd27975.jpg

    Install over studs and make small cut in filter sock to allow it over the studs

    ba059c10.jpg

    5a6143c0.jpg

    Secure in place with nyloc nuts 

    b3bd474b.jpg

    Now it’s easy to replace the filter sock daily on a dusty ride without disturbing your foam filter. 

    December 6, 2011 at 10:56 pm #212769

    Dwayne O
    Member

    Thanx for the reminder Jacko :)

    I have been meaning to get some pool filter skins for the Kato,,,
    Apparently they stretch over the top of the 690 airbox real well and get clamped between the box opening and the snorkel type lid ;) ;) ;)
    MickP told me ages ago & I keep forgetting (haven`t done any mega dusty rides lately either, and having three filters is handy)

    Cheers

    December 7, 2011 at 1:36 pm #212778

    Angus Stainlay
    Member

    Thanks lads.
    At $6 for 5 of them at Coles, I think I may have found a cheap disposable filter system.
    It is a throw away society after all……

    December 7, 2011 at 5:27 pm #212770

    Matt Hobbs
    Member

    I plan on doing Nicks filter set up this weekend. Looks like the perfect setup.

    December 7, 2011 at 6:36 pm #212771

    Greg
    Member

    yeah its a great idea, works real good. How ever did you think of it Nick :laugh:

    Seriously it works ;)

    TB

    December 8, 2011 at 12:51 am #212772

    Matt Hobbs
    Member

    Now now, we all know TB is the MAN.
    Should I have called it the OB filter skin mod?

    December 8, 2011 at 12:59 am #212894

    Greg
    Member
    Desert Matt wrote:
    Now now, we all know TB is the MAN.
    Should I have called it the OB filter skin mod?

    No seriously Matt credit where credit is due it is Nick’s mod he bought the gear and made it. He made me a set ( but we lost them somewhere) it is a private joke with Nick really that I use since he took my jersey :laugh: He has shared it on ADV rider as well and its been well received as it should cause it works. Give a go Matt

    Hey how is the Tenere going?

    TB

    December 8, 2011 at 7:08 am #212895

    Nick Jackson
    Member

    Credit where credit IS due , TB and I spent a lot of time discussing how we could fit a skin to the Ten and change it without disturbing the foam filter. I tried the skin over the standard Ten filter cover , TB suggested securing it with a special stud , I used threaded rod and tried it . It does work but the seed for this mod was sown by TB , I just made it and got it working first ;) :D

    To do a 3000km+ dusty ride and change 3 skins simply and the foam filter to remain clean has to be a good thing ;)

    December 8, 2011 at 9:46 am #212773

    Matt Hobbs
    Member

    Someone should get you two guys a room!

    It doesn’t matter where it came from. It’s just a great mod.

    TB, the 10 is going great. Haven’t seen it for 3 weeks due to work and a holiday to surfers for the rugby 7s. Pick it up from its 1000 km service today. It has been on a few rides through the mid north farming land here, but the best was hitting the twistys in the Adelaide hills.

    I have to do this filter mod, I bought a B&B rack and reshaped seat from Ron Grant on ADV. I’ll be sending the suspension to Teknik in January, and fitting some knobs when that comes back for some more dirt exploration.

  • Author
    Posts
Log In Register Lost Password
Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.