Go To...

Lowering a 01′ WRF250R

Home › Forums › Yamaha Bikes › Yamaha Bikes › Lowering a 01′ WRF250R

This topic contains 1 reply, has 0 voices, and was last updated by  Greg 12 years, 9 months ago.

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 29, 2012 at 9:07 pm #101601

    Todd Jackson
    Member

    Hi Guys,

    Looking for a bit of help, I am currently trying to modify an 01′ Wr250. I am hopingto lower the bike somewhat (I am hoping to transfrorm it into a scrambler/flat tracker hybrid) See pic attached for a bit of an idea of what I’m hoping to achieve
    I think I can install a lowering link on the rear, but dropping the front forks is hampered by the bars. Can I get ‘off set’ bar rrisers? I want to drop the fork through the triple clamps by about 25mm.

    Now any idea where to get a lowering linkage kit?
    And if available ‘off set’ bar risers??

    Cheers
    Action

    June 29, 2012 at 10:41 pm #225171

    Greg
    Member

    Speak with Tekniks they can lower it enough to scrape the frame on the ground :laugh: Check Kat’s bike for a good example ;)

    TB

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.