Go To...

Mitas E-07

Home › Forums › Yamaha Bikes › Yamaha Bikes › Mitas E-07

This topic contains 3 replies, has 0 voices, and was last updated by  Ian Carr 10 years, 11 months ago.

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 20, 2014 at 10:42 am #103858

    Ian Carr
    Member

    Hi all can anyone tell me if the Mitas E-07 130/80-17 still has the solid rubber tread strip running around the out side centre of the tread ?? The 140/80-17 hasn’t would a 140 fit the XT660Z??. Thanks.

    April 20, 2014 at 10:51 am #255991

    Greg
    Member

    Is the arrowed section what your mean mate?

    be70b697-25b3-4847-9f57-b148cc020508_zpsc23701be.jpg

    I really dont know but can find out for you through Adv Moto. I only run full knobbies now and only ran one E07 on the NX years ago

    TB

    April 20, 2014 at 11:17 am #255993

    Ian Carr
    Member

    Yes thats it, the old 130 I have at home has that band . But a 140 I saw on a bike yesterday did not, all tread , looked a good working tread and footprint, on the 130 as the tyre ware’s you have that solid rubber section. Yes I have been running 606 for sometime also , just looked like a good tyre for those other rides !
    Thanks TB

    April 21, 2014 at 9:48 am #255992

    Chris
    Member

    Are you sure u mean the Mitas E-07 and not the Heidenau K60 Scout which does have a strip down the middle on the largest sizes due to them going on bigger bikes like a BMW

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.