Go To...

bike repare

Home › Forums › Introduce Yourself › bike repare

This topic contains 3 replies, has 0 voices, and was last updated by  Peter Sharman 10 years, 2 months ago.

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 30, 2015 at 11:01 am #104333

    Peter Sharman
    Member

    Hi fellow dirt riders.
    Have to renew top & bottom head stock race & bearing.
    Does any one have a bearing puller that is long enough to grab the bottom bearing on the head stock.
    If so call me 0418497048
    Thanx Peg

    January 31, 2015 at 2:08 am #260947

    Damien Bonora
    Member

    Hey Peg, do you have any access to an oxy set? If so you can apply some heat quickly and it should drop off. You can remove the cage and rollers and apply the heat just to the inner with the stem upside down in a vice, bit of heat and gravity will be your friend ;)

    January 31, 2015 at 2:30 am #260951

    Matt Baker
    Member

    What bike?

    On KTM, Berg and Husky you can press the head stem out of the lower triple clamp and the bearing comes with it.

    January 31, 2015 at 4:46 am #260952

    Peter Sharman
    Member

    2012 YZF 450. Aluminum stem. am not keen using heat on aluminum

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.