Go To...

Shock removal from WR

Home › Forums › Tech Help › Tech Help › Shock removal from WR

This topic contains 9 replies, has 0 voices, and was last updated by  Bill 15 years, 10 months ago.

Log In Register Lost Password
Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • June 28, 2009 at 6:12 am #96704

    scott bocking
    Member

    I want to pull the shock out of my WR but it seems I have to pull the whole back end out to do it.

    Does anyone have any advice.

    Cheers

    June 28, 2009 at 6:16 am #141519

    Chris
    Member

    What year stm, I have an 08 service manual I can look it up for you if you need me to.

    Chris.

    June 28, 2009 at 6:16 am #141520

    Greg
    Member

    tnt.jpg

    Seat, side covers, sub frame, support on a centre stand, top and bottom bolts basically

    TB

    June 28, 2009 at 6:19 am #141521

    scott bocking
    Member

    chris72a wrote:

    Quote:
    What year stm, I have an 08 service manual I can look it up for you if you need me to.

    Chris.

    It is an 05 250

    June 28, 2009 at 6:38 am #141524

    Fez
    Member

    I have a WR450F(S) factory owners manual with all that stuff in it. It tells you how to take out the rear shock. If you need it I will pm you my number so you can pick it up from Coffs if you need it.

    June 28, 2009 at 6:43 am #141522

    Greg
    Member

    Seat, side covers, sub frame, support on a centre stand, top and bottom bolts basically dont need a manual trust me

    June 28, 2009 at 6:52 am #141523

    glenn
    Member

    Trailboss wrote:

    Quote:
    tnt.jpg

    Seat, side covers, sub frame, support on a centre stand, top and bottom bolts basically

    TB

    Or If you want to remove the shock quickly 30_500s.jpg

    June 28, 2009 at 8:59 am #141525

    scott bocking
    Member

    Thanks for the help guys. Blue450 is sending me the manual on PDF and in the meantime I will take TB’s advice and just hook in, minus the TNT:laugh:

    June 28, 2009 at 9:00 am #141560

    Greg
    Member

    singletrackmind wrote:

    Quote:
    Thanks for the help guys. Blue450 is sending me the manual on PDF and in the meantime I will take TB’s advice and just hook in, minus the TNT:laugh:

    Can sometimes leave the sub frame attached at one end and pivot it and tighten the bolts to hold it out of the way

    TB

    June 28, 2009 at 10:50 am #141561

    Bill
    Member

    If you are replacing the lower bush can be done installed with link and swing arm removed but if not get the tee bars warmed up

  • Author
    Posts
Log In Register Lost Password
Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.