I need some advice. On the weekend I noticed that all the turning signal stopped working. Not that you need that in the bush but if you hit the tar it good to have.
Couldn’t sleep
so 2am this morning I consulted my shop manual and after tinkering around I removed the turn signal relay from the connector and found it very dirty. So after cleaning the terminals I put it back in only to find the problem not fixed.
The book talks about connecting the terminals of the wire harness connector with a jumper wire…(so what the frig does that mean) then turn on and check turn switch
If light does not come on check open circuit in wires
If light comes on check connector terminals for loose/poor contact. If connector terminals are ok replace the turn signal relay
So I don’t know how to do the jumper wire but I noticed that when I turn the blinkers on I hear a click in the relay box. How do I determine if I need to replace the turn signal relay.
Sorry if this is dumb question but very green at this sort of stuff but giving it a go.
Kat