Go To...

Tenere tank removal

Home › Forums › Do It Yourself Videos, Photo Posts Helpful Hints › Do It Yourself Videos, Photo Posts Helpful Hints › Tenere tank removal

This topic contains 1 reply, has 0 voices, and was last updated by  Greg 14 years, 2 months ago.

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 20, 2011 at 12:14 am #99786

    Nick Jackson
    Member

    TANK REMOVAL ( this may save someone some time !)

    Remove side plastics and indicator plastics
    960bb4d5.jpg
    b9f2c7dd.jpg

    Remove seat

    Remove flat tank bracket under seat

    9babf5e3.jpg

    Remove tank bolts behind radiator , if crash bars have been fitted remove spacer with the bolt. 

    View with crash bars fitted
    ab420d52.jpg

    Remove handle bars and lay forward

    67ddb1b6.jpg

    880c30f8.jpg

    Disconnect fuel pipe underneath tank

    9ae56bf1.jpg

    Unplug sensor wires

    4e9a5e85.jpg

    Remove tank over flow pipe or pull up with tank 

    I had no fuel run out of the tank outlet pipe but as their is no tap I used the overflow pipe and pushed it on the outlet to be sure. 

    bed5ad07.jpg

    06715633.jpg

    Lift off tank

    a44e31e0.jpg

    72eb6d30.jpg

    April 20, 2011 at 10:08 am #199783

    Greg
    Member

    Cheers Nick it will save me time for sure. I am about to pull my Tenere down and go over it from end to end as it has now done 20k. While it’s stripped down it will get a good clean, I will run spare in place cables for clutch and throttle pull. I will check the valve clearances and fit all the new parts I have coming for Camerons which is only 20 weeks away

    Thanks for taking the time to do the DIY thing up as I am sure it helps people. Anyone can post up how they do something as I am sure it helps others as this one will help me and it’s doesnt have to be a video as Nick has shown

    TB

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.