Go To...

300 EXC Top End Rebuild

Home › Forums › KTM Bikes › KTM Bikes › 300 EXC Top End Rebuild

This topic contains 17 replies, has 0 voices, and was last updated by  Dean 14 years ago.

Log In Register Lost Password
Viewing 3 posts - 16 through 18 (of 18 total)
1 2
  • Author
    Posts
  • April 12, 2011 at 1:43 pm #199374

    murph the surf
    Member

    I like to measure the bore using a Bore gauge, its a dial indicater on a stick. Might be a bit hard to come accross one unless you know a mate in the fitting trade. Inside micrometers will suffice and outside micrometers are are the go too for checking piston size.
    Cheers
    Murph

    April 12, 2011 at 6:59 pm #199376

    Roy
    Member

    Sorry for being a bit random with my questions but I’m just putting them up as they occur to me.

    With the gaskets do you just put them on dry or do you need some sort of gasket goo.

    April 12, 2011 at 8:11 pm #199380

    Dean
    Member

    the gaskets are put on dry , but it pays to put a small amount of three bond over the area where the cases join. ;)

    ollie

  • Author
    Posts
Log In Register Lost Password
Viewing 3 posts - 16 through 18 (of 18 total)
1 2

You must be logged in to reply to this topic.