690R Air Filter Sock Mod

Home Forums KTM Bikes KTM Bikes 690R Air Filter Sock Mod

This topic contains 4 replies, has 0 voices, and was last updated by  Dean Weik 13 years, 3 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #100812

    Dwayne O
    Member

    :) Thanx to MickP for the advice a long time ago and NickJ for the reminder this week (no thanx to TB actually at all) :laugh:

    I grabbed some Pool Skimmerbox Socks from KMart (Coles here don`t stock them) $5 for 5 socks ;)

    Here is the standard 690 filter and springs clean, oiled & ready to go back in

    [attachment=3046]2011-12-1011.26.01.jpg[/attachment]

    [attachment=3047]2011-12-1011.26.28.jpg[/attachment]

    Airbox clean & ready for filter

    [attachment=3048]2011-12-1011.26.54.jpg[/attachment]

    Filter snorkel (airbox lid) and clean skimmer sock ready to go back on

    [attachment=3049]2011-12-1014.08.28.jpg[/attachment]

    Oiled up the sock & installed over the top of the snorkel (only oiled the one half that is actually going between snorkel & filter to catch the dust) Left the rest oil free so as to not collect an abundance of extra dust on top of the Airbox :whistle:

    [attachment=3050]2011-12-1014.11.00.jpg[/attachment]

    All back together ready to ride

    [attachment=3051]2011-12-1014.14.21.jpg[/attachment]

    A very simple mod that can be easily be replaced quickly on a long ride without removing the actual Airfilter if it is reasonably clean ;) Not to mention the extra life expectancy of the Air Filter due to less cleaning required & less Filter Oil expense too :woohoo:

    THANX AGAIN GUYS B)

    #212974

    Nick Jackson
    Member

    Nice mod their Eags ;) you gotta love those pool filter socks :)

    #212976

    Dwayne O
    Member
    Nickj wrote:
    Nice mod their Eags ;) you gotta love those pool filter socks :)

    Yep, And you get some of the satisfaction out of the job too mate (just don`t tell that TB bloke) :whistle:

    :laugh: :laugh:

    #212979

    Dean Weik
    Member

    Great idea there Eags. I will have to grab a few of those socks next time I’m near a Kmart :) :)

    #212975

    Dwayne O
    Member

    I can`t take any credit for this one mate,,,,
    But I do like the fact of being able to share the tips with others on here ;)

    Like my tank anchor tip, now Twobanger is gonna have a go at two spinners in a Husky tank :whistle: :)

    Same principal should work on a variety of late models bikes with plastic tanks, there are heaps now with plastic tanks that have fasteners for all sorts of things like shrouds etc etc , and if not treated carefully they can strip out, seize up or like mine, spin freely in the tank :whistle:

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.