Go To...

94 KTM400

Home › Forums › KTM Bikes › KTM Bikes › 94 KTM400

This topic contains 3 replies, has 0 voices, and was last updated by  Dean 13 years, 3 months ago.

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 17, 2011 at 8:40 pm #100838

    Stuart Waugh
    Member

    Gday guys,
    The brother-in-law has just bought a 94 KTM 400 (LC4 I assume). It’s a bit rough around the edges, but seems to run ok. Is there anything we should know or should look for, other than the basic stuff you do when you buy a used bike?

    December 17, 2011 at 8:58 pm #213338

    Eric Smith
    Member

    I had a 99 KTM640 LC4 with fairly high k’s. Had a few bolts strip needing helicoils, but otherwise no problems. They are a pretty reliable old donk.

    December 18, 2011 at 1:08 am #213341

    Dean
    Member

    did this model have a cam chain or a cam belt? if it was the belt they are a pian in the arse, chain was much better.

    ollie

    December 19, 2011 at 9:24 pm #213339

    Stuart Waugh
    Member

    I don’t know if it has a cam chain or belt, we haven’t opened it up yet. I took it for a quick scoot and it goes like stink. By the looks of things we might be able to get away with a service and a bit of a tidy up.
    Cheers guys

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.