Go To...

Ballards Bike Stand

Home › Forums › General Bike Talk › Ballards Bike Stand

This topic contains 39 replies, has 0 voices, and was last updated by  Anonymous 16 years, 2 months ago.

Log In Register Lost Password
Viewing 15 posts - 1 through 15 (of 40 total)
1 2 3
  • Author
    Posts
  • January 19, 2009 at 7:37 am #95718

    Dwayne O
    Member

    I ordered a Ballards Blue lift stand today, on sale for $59:) :) :)
    Anybody else got one or seen em in action ???? Hope they are ok:unsure:
    For the $$$ I`ll give anything a go, time to throw away the blocks I`ve been strugglin with;)

    January 19, 2009 at 7:56 am #118742

    Scott Southwell
    Member

    Might slip down to Ballards and have a look at one of these myself. Just put new tyres on the DRZ, pain in the arse without a stand.

    January 19, 2009 at 8:20 am #118743

    Dwayne O
    Member

    Yeah Scotty, heres the link http://ballards.cc/Text/1116569460812-7036/Blowout-Bargains
    Cheers

    January 19, 2009 at 8:27 am #118754

    adam
    Member

    Got a blue stand.Dairy Farmers I think

    January 19, 2009 at 9:06 am #118757

    Greg
    Member

    Ha Eagle Chris as one of those he had to lift his KLX to get it on before it could be used, prick of a thing sorry, but looks the same :(

    TB

    January 19, 2009 at 9:14 am #118744

    Dwayne O
    Member

    No worries TB,
    If I need to I can mod it to be a bit lower I rekon,,,,,, for $59 I can afford to stuff with it
    Cheers Mate

    January 19, 2009 at 9:32 am #118767

    Greg
    Member

    Thats right Eagle I agree for the money you cant go wrong, would be better if you came to Hillend though lol

    TB

    January 20, 2009 at 10:16 pm #118772

    Anonymous

    I paid $150 for mine :( Then again it was in the bike shop and I couldn’t be arsed to wait :)

    January 20, 2009 at 10:25 pm #118907

    Chris
    Member

    Yep eagle as TB said, doesn’t fit under the KLX, doesn’t even fit under the WR but only by a smidgen!! I’ll bring the KLX parts out to Hillend for you.

    Cheers
    Chris.

    January 20, 2009 at 10:27 pm #118911

    Anonymous

    Put some more air in your tyres Chris :P

    January 20, 2009 at 10:35 pm #118912

    Chris
    Member

    Yeah good one moto, I could get bigger knobbies too.. With the Bashplate off it slips under nicely but just a tad to low with it on..

    Cheers
    Chris.

    January 20, 2009 at 10:44 pm #118914

    Anonymous

    Are there any rubbers of foot pads that can be removed/ground off to sit it a smidge lower?

    You could cut a small hole in your garage floor :laugh:

    January 20, 2009 at 10:50 pm #118917

    Chris
    Member

    Now your talking!! That’s the best idea you’ve had for a long time, Just need to find a jackhammer now or a concrete saw. I reckon about 1 inch will do it.

    Thanks Moto

    Chris. ;) ;)

    January 20, 2009 at 10:56 pm #118918

    Anonymous

    chris72a wrote:

    Quote:
    Now your talking!! That’s the best idea you’ve had for a long time, Just need to find a jackhammer now or a concrete saw. I reckon about 1 inch will do it.

    Thanks Moto

    Chris. ;) ;)

    I’d piss myself if in 2 weeks time I found out that you did it :laugh:

    January 20, 2009 at 10:57 pm #118919

    Chris
    Member

    I reckon if you get a piece of steel to replace the 1cm thick wood it would fit nicely, I think that is what I will do.

    Cheers
    Chris.

  • Author
    Posts
Log In Register Lost Password
Viewing 15 posts - 1 through 15 (of 40 total)
1 2 3

You must be logged in to reply to this topic.