This topic contains 8 replies, has 0 voices, and was last updated by Geoff Forshaw 13 years, 8 months ago.
-
AuthorPosts
-
July 24, 2011 at 2:58 pm #100230
Bullet Proof Design
Hello All,
I have just secured the Australian Distributorship for Bullet Proof Design Guards!
Made in the USA
Radiator Guards
[attachment=2677]2011-07-18_18-21-14_954.jpg[/attachment]
Machined from a solid block of 6061-T6 aluminum for superior strength. Not stamped and bent like cheaper guards
Protects complete radiator from top to bottom
Does not effect cooling or air flow
Mounts to frame to provide side and frontal impact resistance
Each guard weighs approximately 340gms
Lifetime original owner warranty AU$200set + GSTRear Disc Guards
[attachment=2678]2011-07-18_18-19-36_442.jpg[/attachment]
Machined from a solid block of 6061-T6 aluminum for superior strength.
Complete Brake Carrier Design
Lifetime original owner warranty AU$120 + GSTSwing Arm Guards
[attachment=2679]2011-07-18_18-20-13_111.jpg[/attachment]
Machined from a solid block of 6061-T6 aluminum for superior strength.
Guard protects and supports chain guide and swing arm taps
A must have if riding rocks!
Comes complete with all hardware, drill and tap
Lifetime original owner warranty AU$60 + GSTCheck out the the US website for more information and product model details; http://www.bulletproofdesigns.com
Anodising add AU$20
PM me for your Order and further details
Cheers
LeftyJuly 25, 2011 at 10:14 pm #205387Good on you Lefty.
They look like some quality items. I have been looking for a rear disc guard to protect against fallen 4 stroke riders. 👿 Will have to start saving. Do you do Lay-buys? :whistle:
Does the chain guide protector completely cover the guide or bolt up flush to it? Any on bike pics?Cheers
July 26, 2011 at 1:11 am #205388They look the biz Lefty.
Might give the rear disc guard a go.
PM sent.
July 26, 2011 at 1:43 am #205477GaleyKTM300 wrote:Good on you Lefty.They look like some quality items. I have been looking for a rear disc guard to protect against fallen 4 stroke riders. 👿 Will have to start saving. Do you do Lay-buys? :whistle:
Does the chain guide protector completely cover the guide or bolt up flush to it? Any on bike pics?Cheers
Hey Galey,
Just got back from Seaview on Sunday and here are some pics. Bike is dirty though, sorry. :dry:Radiator Guards
[attachment=2687]2011-07-26_21-09-41_98.jpg[/attachment]
Rear Disc Guard
[attachment=2688]2011-07-26_21-09-20_932.jpg[/attachment]
[attachment=2689]2011-07-26_21-09-09_686.jpg[/attachment]
Swing Arm Guard
[attachment=2690]2011-07-26_21-07-52_960.jpg[/attachment]
[attachment=2691]2011-07-26_21-07-41_655.jpg[/attachment]
Cheers,
LeftyJuly 26, 2011 at 1:53 am #205516I have a KTM/Husaberg Rear disc guard and a set of KTM/Husaberg Radiator guards in stock. (Not anodised)
Cheers,
LeftyJuly 26, 2011 at 2:00 am #205520Hi All,
I will be placing an order tomorrow if anyone would like to place an order of a particular item. I should have the items here in about a week. Anodising may take a little longer if nil stock in the US. :blush:
Cheers,
LeftyJuly 26, 2011 at 2:31 am #205523Hi lefty, really good quality looking gear mate ! Do they do rad guards for a Tenere ?
Nick
July 26, 2011 at 7:07 am #205389Congrats on the Aus distribution rights. I have used most guards over the years and BP have been my last port of call, in my humble opinion they are the best available in the world. A big pat on the back for the pricing as well, as it is comparible to the states, so it looks like my future purchases stay in Aus.
I noticed you offer the anodised option, the last set of rad guards I got were orange. Will you be able to get the coloued option from B Proof as well. When the new kato comes at the end of the year I would prefer the orange model.
It makes the bike go heaps faster
July 26, 2011 at 8:55 am #205540Hi Nick,
They are not available for the Tenere at this stage but i will be speaking to them about manufacturing them for the Adv bike market.Hi Nathax,
I have been told Orange is available.Cheers,
Lefty -
AuthorPosts
You must be logged in to reply to this topic.