Go To...

clutch/ brake cable repairs, anyone in newcastle

Home › Forums › Tech Help › Tech Help › clutch/ brake cable repairs, anyone in newcastle

This topic contains 5 replies, has 0 voices, and was last updated by  ian 14 years, 3 months ago.

Log In Register Lost Password
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 5, 2011 at 7:41 am #99382

    ian
    Member

    just bought a ktm sx junior for the boys and it had a the rear brakes on the handlebars and i want to change it back to a foot brake . I have the cable and foot brake but it (the cable needs to be shortened ) its to long and was wondering if anyone had any ideas apart from the obvious (buy a new one) the cable is still in great condition is there somewhere that makes cables in the newcastle area that i ccould take it to for them to have a look at? cheers huskybloke

    January 5, 2011 at 8:05 am #193922

    Greg
    Member

    Ballards used to sell a kit Ian that had a different bits and pieces including ends that could be fitted. The rest of the kit could be a bonus in your bum bag ;)

    TB

    January 5, 2011 at 8:10 am #193924

    Greg
    Member

    Ballards Catalogue

    Page 63

    cost$12.95

    TB

    January 5, 2011 at 8:17 am #193925

    ian
    Member

    cheers TB will check it out

    January 5, 2011 at 8:28 am #193926

    pete
    Member

    Hi there Malcom, 12 gauge fencing wire is all you need.

    January 5, 2011 at 9:39 am #193927

    ian
    Member

    thats old school stuff mate, cableties are the go now

    pete the wulf wrote:

    Quote:
    Hi there Malcom, 12 gauge fencing wire is all you need.
  • Author
    Posts
Log In Register Lost Password
Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.