Go To...

Coolant advice

Home › Forums › Tech Help › Tech Help › Coolant advice

This topic contains 3 replies, has 0 voices, and was last updated by  Dwayne O 13 years, 10 months ago.

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 21, 2011 at 10:37 pm #100528

    Dwayne O
    Member

    Since I had my little mishap on the Sunday ride I have repaired the radiator (looks to be successful)
    But am thinkng of waiting till I am 100 percent sure it is before I replace the coolant.

    So the question is,
    I used about half a 500mls of water from the cmelback over the 3 times that I topped it up on the home run. IS there any issue with leaving it as is for a few weeks before changing the coolant and giving the system a flush ???
    I did add some glycol concentrate when I got home to top the level to full.
    :whistle: :whistle: :whistle:

    September 21, 2011 at 10:56 pm #209464

    Greg
    Member

    Cant see a problem for a couple weeks, but sooner you get it back to the correct levels the better

    TB

    September 21, 2011 at 10:59 pm #209472

    Geoff Forshaw
    Member

    Yeah No drama’s with that Eag’s. ;)

    Cheers Lefty

    September 21, 2011 at 11:01 pm #209473

    Dwayne O
    Member
    Trailboss wrote:
    Cant see a problem for a couple weeks, but sooner you get it back to the correct levels the better

    TB

    That`s what I thought would be the case,,, Thanx mate I will flush it and change asap ;)

    Cheers to you too Left One :)

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.