Go To...

Edelbrock Pumper

Home › Forums › For Sale › For Sale › Edelbrock Pumper

This topic contains 7 replies, has 0 voices, and was last updated by  Jeffrey Smith 14 years, 8 months ago.

Log In Register Lost Password
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 18, 2010 at 11:27 am #98739

    Chris
    Member

    Forsale one Edelbrock Quicksilver Pumper Carb and cables for an XR400.. I do not know if it will fit any other bike..

    $300 firm……………………..

    July 18, 2010 at 8:55 pm #184089

    Mick D
    Member

    what size is it Krusty??

    July 18, 2010 at 10:38 pm #184090

    Chris
    Member

    Hi Mick – I don’t think it will fit on the 650R

    XR400 Specs

    Bore Size: 38mm Tall X 32mm Wide
    Needle: 15E @ 12 Clicks
    Accelerator Pump Bypass: 2.75 turn out
    Alternate Needles: 13E, 17E
    Replacement Cables: #9331

    XR650R Specs

    Bore Size: 36mm Tall X 42mm Wide
    Needle: 19E @ 18 Clicks
    Accelerator Pump Bypass: 1.5 turns out
    Alternate Needles: 17E, 21E
    Replacement Cables: #9345

    July 18, 2010 at 10:42 pm #184104

    Greg
    Member

    He may also have been interested for trippers xr600 or his nx?

    TB

    July 18, 2010 at 10:47 pm #184106

    Jeffrey Smith
    Member

    You know what Mick’s like, he is a hoarder, especially when it comes to Honda parts. :D

    July 19, 2010 at 3:09 am #184091

    Chris
    Member

    no good for the 600 either I believe..

    XR600

    Bore Size: 40mm Tall X 34mm Wide
    Needle: 17E @ 15 Clicks
    Accelerator Pump Bypass: 2 turn out
    Alternate Needles: 15E, 19E
    Replacement Cables: #9332

    August 9, 2010 at 12:17 pm #184092

    darren cook
    Member

    Hi Krusty
    Have you still got carb
    Darren

    August 9, 2010 at 9:42 pm #184093

    Chris
    Member

    No sorry mate.. It didn’t even last 24 hours on ebay..

  • Author
    Posts
Log In Register Lost Password
Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.