Go To...

Electrical Short

Home › Forums › General Bike Talk › Electrical Short

This topic contains 2 replies, has 0 voices, and was last updated by  Greg 9 years, 5 months ago.

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 7, 2015 at 8:16 am #104623

    Chris
    Member

    Hey all, if I use my 12v test lamp on my light circuit I am getting a positive result even with the switch off, which probably means power is feeding to the lights regardless of if switch on or off, sick of replacing batteries there has to be a short somewhere. Any Ideas.
    Cheers
    CHris.

    November 7, 2015 at 10:35 am #262924

    drew
    Member

    A lot of circuits are negative switched I.e. live positive all the time, negative switch.

    Is the reading with the key on or off?

    November 7, 2015 at 10:38 am #262925

    Greg
    Member

    I will come up week after next (Newcastle next week) with a amp meter and a multimeter. 2 beers and it will be fixed promise
    (too tired and drunk to explain how now :pinch: )

    TB

  • Author
    Posts
Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.