Go To...

Fitting Barrett racks???

Home › Forums › General Bike Talk › Fitting Barrett racks???

This topic contains 3 replies, has 0 voices, and was last updated by  Greg 11 years, 3 months ago.

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 21, 2013 at 5:55 am #103515

    Dave
    Member

    Greetings all!! :woohoo: I’m trying to fit a set of Barrett Expedition racks to my 660 Tenere. Can someone let me know what needs to be removed to fit the mounting bolts? At the moment I have removed the rear luggage rack, bolts holding exhaust cover, bolts fixing tail light assembly & still can’t work it out???? I’m sure it’s not difficult & I’m probably missing the obvious but my limited technical ability combined with my 18 year old K – Mart tool kit is taking it’s toll on my limited patience. Thanks in advance for any assistance.

    Sneaky B)

    December 21, 2013 at 10:51 am #252673

    Greg
    Member

    Hi sneaky,
    there are some good pics if you google around, see link below.
    http://www.xt660.com/showthread.php?t=20665
    I am only up at Westy and have good reasonable set of tools that are capable of mass destruction if you need anything let me know and if can help I can drop it down.
    Cheers

    December 21, 2013 at 11:23 am #252677

    Greg
    Member

    Hi mate, sorry just saw this thread. Do you have a standard exhaust? I will take a few pics in the morning and explain if that helps as well

    TB

    December 21, 2013 at 12:07 pm #252674

    Dave
    Member

    Thanks Popz61, will let you know how I go & if I require any of your destuction abilities. TB I have the standard pipes on!!
    As I said I have probably undone a heap of unnecessary bits so the pics would definitely help.
    Cheers!!! :)

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.