Go To...

Fork rebuild

Home › Forums › Mud n Tar Suzuki Bikes Forum › Mud n Tar Suzuki Bikes Forum › Fork rebuild

This topic contains 0 replies, has 0 voices, and was last updated by  Nick 13 years, 5 months ago.

Log In Register Lost Password
Viewing 1 post (of 1 total)
  • Author
    Posts
  • November 5, 2011 at 11:16 pm #100669

    Nick
    Member

    Hi, does anyone have any experience of taking apart forks from a 99 RMX 250, as they do not come apart easily.

    I have got the seals and bushings out but cannot remove the inner fork tube as it is held in somehow. I think it is to do with the nut at the bottom of the fork leg. It has a clicker adjuster in the middle. The bolt just spins along with the inside. Will a rattle gun work? What do you think???

    I can replace the seals and bushings without removing the inner fork leg but would like to take it out and make sure everything is all good.

    I will try to put some pictures up soon to better explain

  • Author
    Posts
Log In Register Lost Password
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.