Heated Grips Group Buy.

Home Forums Current Sponsor Deals Current Sponsor Deals Heated Grips Group Buy.

This topic contains 99 replies, has 0 voices, and was last updated by  glenn 15 years, 9 months ago.

Viewing 10 posts - 91 through 100 (of 100 total)
  • Author
    Posts
  • #137775

    Dwayne O
    Member

    Anyone got their Heated Grips installed & running yet ????
    I`m doin` mine say arvo (I hope:dry: )

    #142138

    Greg
    Member

    EAGLE`02 wrote:

    Quote:
    Anyone got their Heated Grips installed & running yet ????
    I`m doin` mine say arvo (I hope:dry: )

    Say what arvo Beagle?? :laugh: :laugh: :laugh:

    TB

    #142181

    glenn
    Member

    my new grip warmers turned up today,and there easy to fit Don`t know what the fuss is all about.. Luoti_gloves.jpg

    #137776

    Peter W
    Member

    I have been told that if you spray some of this on your hands you will have no problems!
    htfuys6.jpg

    Im gunna give it a try and if it doesn’t work I will purchase some grip heaters :laugh:

    #137777

    Dwayne O
    Member

    Pads & new grips are on, switch bkt made and wiring is half run & clipped to the bars;)

    Just wanna confirm which wire to connect the other end to get 12v from the light tomorrow after soccer & she will be WARM HANDS on the way to work Monday morn:) :) :)

    Installation is a piece of cake, probably 1.5hrs total

    Thanks again to Mal at Sutto`s for the great deal & productB)

    #142231

    Dwayne O
    Member

    EAGLE`02 wrote:

    Quote:
    Pads & new grips are on, switch bkt made and wiring is half run & clipped to the bars;)

    Just wanna confirm which wire to connect the other end to get 12v from the light tomorrow after soccer & she will be WARM HANDS on the way to work Monday morn:) :) :)

    Installation is a piece of cake, probably 1.5hrs total

    Thanks again to Mal at Sutto`s for the great deal & productB)

    A bit worried about wiring to the light,,,,
    I will attach to something else (ignition etc)
    Any suggestions????

    #142235

    glenn
    Member

    EAGLE`02 wrote:

    Quote:
    EAGLE`02 wrote:

    Quote:
    Pads & new grips are on, switch bkt made and wiring is half run & clipped to the bars;)

    Just wanna confirm which wire to connect the other end to get 12v from the light tomorrow after soccer & she will be WARM HANDS on the way to work Monday morn:) :) :)

    Installation is a piece of cake, probably 1.5hrs total

    Thanks again to Mal at Sutto`s for the great deal & productB)

    A bit worried about wiring to the light,,,,
    I will attach to something else (ignition etc)
    Any suggestions????

    cut the red wire beagle the red onesmiley-excited001.gif

    #137778

    Dwayne O
    Member

    Thanx Boon ( I think NOT) :P

    You have NO IDEA ,, Do Ya ?????:laugh:

    #142236

    glenn
    Member

    EAGLE`02 wrote:

    Quote:
    Thanx Boon ( I think NOT) :P

    You have NO IDEA ,, Do Ya ?????:laugh:

    your dead right ,,,I haven`t got a clue:(

    #137779

    Dwayne O
    Member

    Now have em wired up, working and yes the hands are nice & warm;)
    Left it running on the low setting for a solid 5 mins before the left grip heated enough to notice with bare hands (would have been good to insulate the bar first , as a lot of the heat is transferred into the bars first:huh: ) The throttle tube, being plastic, is almost instantaneous warmth:) :) :)

    I have temporarily wired the power lead straight from the battery at present, till I am 100 % happy with the test ride on Monday,,,, I also need to get to work to use the heat gun to shrink all the heatshrink on the cable connections etc;)

    One point to note is , the positioning on the WHITE RESISTOR, as it gets F@%#&*@G HOT:blink: So be careful to keep it away from other importatnt cables & plastic parts!!!
    Mine is cable tied to a small steel bar on the bottom of the headlight assembly, where it will also get tonnes of fresh cool air whilst on the move ;)
    So FAR, Very Happy indeed:woohoo:

    Good Luck All

Viewing 10 posts - 91 through 100 (of 100 total)

You must be logged in to reply to this topic.