Go To...

Home made side stand

Home › Forums › General Bike Talk › Home made side stand

This topic contains 3 replies, has 0 voices, and was last updated by  Trent 15 years, 10 months ago.

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 19, 2009 at 5:16 am #96416

    DAVE PURDOM
    Member

    Got bored today so made my yz426 a side stand
    th_me2003.jpg
    th_me2005.jpg
    th_me2004.jpg
    its not that pretty, but it does the job, bolts to the subframe bolt, and the chain roller bolt, cost me.. $28 nz
    total.. the bloody spring was $17 at bunnings
    Its made out of 3x 50mm square galv washers, and some 12mm rod, with a couple of bolts, and that expensive bunnings spring,some rust kill paint , and some flat black spraypaint

    May 19, 2009 at 5:23 am #134952

    Anonymous

    That’s a pretty good effort for a home made job mate :)

    I fixed the pic link for you too :)

    May 19, 2009 at 5:36 am #134953

    DAVE PURDOM
    Member

    Thanks MOTO

    May 19, 2009 at 5:44 am #134958

    Trent
    Member

    Well done, you might be able to sell your design to KTM!

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.