How to re-build / re-bush your Pivot Pegz

[GregMember]

Well as the title says here is how to re-bush your Pivot Pegz. Since I made the video I have discovered that they have in fact done more then 18,000kms. What would I do different? I would pull them apart and grease the more often to tell the truth, its very easy as you can see Sorry about the camera work its not perfect and hard when you are on you’re own

Parts needed, a rebuild kit which includes, split pins, washers, nuts and bushes. I also purchased a bush removal and installation tool which makes life so easy

http://www.youtube.com/watch?v=ETwWnc-JLZQ

http://www.youtube.com/watch?v=ABl6a0Enfvg

http://www.youtube.com/watch?v=4K0IRfG180I

http://www.youtube.com/watch?v=Ug_wiz6nqqA

TB

[Nick JacksonMember]

Nothing wrong with that camera work TB , think I’ll be greasing mine soon !!

[ChrisMember]

Bravo!!!!

[Mick DMember]

Good work mate, I spose I better give mine a service too, considering I have had the new bush kit for near on a year. :blush:

[timMember]

if you buy the overhaul kit direct, they now throw in the tool
Also make sure you service them as the shaft can not be purchased separately

[GregMember]

micknmeld wrote:

Quote:

Good work mate, I spose I better give mine a service too, considering I have had the new bush kit for near on a year. :blush:

Yeah the kit you had to have at the time :laugh: and its the same one I got you when I got mine :blush: So I sat on mine to long Mick :blush: Saving grace for you could be that yours are not as old as mine Get it done easy money.

Yeah we both got the tool with ours Medogrocket

TB

[scott bockingMember]

Great job as always TB. You have inspied me to grease mine up.

I love your work bench. lets hope the ants don’t get into it :laugh:

STM

[Aaron WildeMember]

Great Vid TB. I Got a set of what I thought were Pivot Pegz ages ago.I got them second hand because a guy tried them but could not get used to them on a MX track. They look sort of the same. But no writing on them. ?Mk1. I took mine off and greased them about 6mths ago. I put the same o rings back in.Yes they were not in top condition but they are still sort of working. But after watching this I will try to get some sort of kit to service them properly. The nut looked more lile a nylock nut not a specially knurled one.

[GregMember]

Glad it helped Aaron. I am going to try and do more DIY videos in the future

TB

[Brendon CarreMember]

Good job TB, I better have a look at mine!! :blush:

[Author]

Posts