KTM EFI recall/retro fit

Home Forums KTM Bikes KTM Bikes KTM EFI recall/retro fit

This topic contains 18 replies, has 0 voices, and was last updated by  murph the surf 13 years ago.

Viewing 4 posts - 16 through 19 (of 19 total)
  • Author
    Posts
  • #218163

    alan
    Member

    just a dumb question but how does efi go when you drown your bike ?is it better or worse than a carby

    #218108

    Alex
    Member

    Hey al i would imagine no difference unless you got water in the fuel in which i can imagine it would do your pump and injector no favours.

    #218165
    white rocket wrote:
    just a dumb question but how does efi go when you drown your bike ?is it better or worse than a carby

    Dunno Rocket
    Kinda been keepin on my toes a little
    Perhaps a good old fashined local dunking would be order. :ohmy:
    Nahhhhhh maybe next time. :laugh: :laugh: 😆

    Bloody good question though. ;) :pinch:

    Cheers
    Murph

    #218274

    New fuel filter fitted today
    I had a go yesterday but realised KTM shop had removed the standard fine filter so when I pulled it apart I had no idea where the filter was meant to fit. To make things worse I pinched the O-ring puting it back together and when I started it, fuel pissed out everywhere. Note to self (do not work on bike when Turkeys are flowing) :(
    Got the Kato boys to fit the new correctly and give me the low down. B)
    Also had a new Thermo fan switch fitted as the old one wasn’t working.
    The new one cuts in around 85 degrees where as the old one wouldn’t cut in until 100 degrees.
    All warranty work so I was happy I didn’t have to reach into my pockets. B)
    Cheers
    Murph

Viewing 4 posts - 16 through 19 (of 19 total)

You must be logged in to reply to this topic.