Go To...

Linkage torque settings XR650R?

Home › Forums › Teknik’s Motorsport Forum › Teknik’s Motorsport your one stop suspension and performance engine shop › Linkage torque settings XR650R?

This topic contains 2 replies, has 0 voices, and was last updated by  Dean 12 years, 3 months ago.

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 8, 2013 at 8:40 pm #102260

    Mick D
    Member

    Just wondering if anyone would know what the correct torque settings are for the linkage bolts on the XR650R?
    Particularly bolts 28,29 and nut 32 in the diagram below.

    MBN4F2100C_zps7f39db3e.gif

    January 8, 2013 at 11:13 pm #235223

    Mick D
    Member

    Never mind, I found them myself.

    N-m (kgf-m, lbf-ft)

    Swingarm Pivot Nut 1 x 18 mm: 108 (11.0, 80)
    Shock Absorber Upper Mounting Nut 1 x 10 mm: 44 (4.5, 33)
    Shock Absorber Lower Mounting Nut 1 x 10 mm: 44 (4.5, 33)
    Shock Arm-to-Swingarm Nut 1 x 12 mm: 78 (8.0, 58 )
    Shock Link-to-Shock Arm Nut 1 x 12 mm: 69 (7.0, 51)
    Shock Link Nut 1 x 12 mm: 69 (7.0, 51)
    Shock Absorber Spring Lock Nut 1 x 56 mm: 29 (3.0, 22)
    Swingarm Pivot Lock Nut 1 x 28 mm: 64 (6.5, 47)

    January 9, 2013 at 12:42 am #235226

    Dean
    Member

    Thanks Mick I was just onto it for Myself as well :laugh:

    Ollie

  • Author
    Posts
Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.