Local run from Buttaba Sunday18-4-10

Home Forums Ride Gatherings NSW Rides Local run from Buttaba Sunday18-4-10

This topic contains 46 replies, has 0 voices, and was last updated by  ian 14 years, 11 months ago.

Viewing 15 posts - 31 through 45 (of 47 total)
  • Author
    Posts
  • #176188

    You’ll be right Huskybloke, Tim and I are about to leave now to do a bit of work on the Amazon track. Just going to fill in a couple of undercut steps that need fixing after I trenched them on the 525. Won’t make it too easy though, that would take all the fun out of it. :woohoo:

    Dan, we might even seeya before the Gap mate as we will be doing a lot of tracks out towards your way in the morning. Seeya if we seeya :blink:

    Too bad Diddel, maybe next time mate :(

    Cheers
    Murph

    #176199

    Mission accomplished :)
    Amazon has been restored to its natural glory and we have finished our new local single with a widow maker at the end as it pops up onto Wangi Rd. Haven’t ridden the last section yet :unsure: should be interesting :silly: :ohmy:
    Bloody strained my back shifting rocks :angry: :angry:
    Might have a little rest then go and see if the little widow maker is makeable :woohoo: :woohoo:
    Cheers
    Murph

    #176230

    ian
    Member

    ive got problems< putting my front tyre back on to the bike and allen key axle nut cracked as i tightened it up its f*#@ed , hoping to get a lend of one or a new one in the morning

    #176282

    Doesn’t sound good Huskybloke :(
    We have Husky dealer just down the road at Morriset. Can I help in any way??? Maybe I could check and see if they have one??? What model and size is she??? Let me know, only to happy to help out :)

    On another note I will shout a beer at the end of the ride to anyone who can top out on our little widow maker on their first attempt :woohoo: :woohoo: I won’t say how many times Tim and I had a go at it before we nailed it :silly: ;) We have made an easier route up the hill for those who are not as keen :) Just a little warning that the easier version pops out pretty close to Wangi Rd, so be careful :ohmy: :woohoo: :woohoo:

    Hoping my back will improve after another nights sleep (still aching a bit) All will be good :woohoo:

    Cheers
    Murph

    #176287

    I think this is the phone number to the Husky dealer at Morriset 49733150.

    #176288

    Mal
    Member

    Murph the surf wrote:

    Quote:
    Doesn’t sound good Huskybloke :(
    We have Husky dealer just down the road at Morriset. Can I help in any way??? Maybe I could check and see if they have one??? What model and size is she??? Let me know, only to happy to help out :)

    On another note I will shout a beer at the end of the ride to anyone who can top out on our little widow maker on their first attempt :woohoo: :woohoo: I won’t say how many times Tim and I had a go at it before we nailed it :silly: ;) We have made an easier route up the hill for those who are not as keen :) Just a little warning that the easier version pops out pretty close to Wangi Rd, so be careful :ohmy: :woohoo: :woohoo:

    Hoping my back will improve after another nights sleep (still aching a bit) All will be good :woohoo:

    Cheers
    Murph

    Good onya Murph another murphsberg in the making. Rest up and ride safe mate.

    Donna and I are about to get on the beemer and go for lunch somewhere. :woohoo:

    #176294

    Perfect day for it Mal
    Take care on the black stuff mate
    Have a good one :)
    Cheers
    Murph

    #176296

    ian
    Member

    all is good , got a lend of one off a mate whos got a husky and is not using it for a while, i will get one next week but in the meantime im good to go

    #176305

    All is good then, except for my back :angry: Spent a lot of the day laying down. Will just have to chew panadols all day tomorrow as I’m keen as mustard to get out for a ride :woohoo:

    Just finished putting a new swing arm to shocky bush in Tims bike and we changed the leaky fork seal in mine (also replaced the bushes this time) So I hope that stops the bugger from leaking ;)

    Don’t forget to bring money for food and petrol. Any 2 bangers coming along don’t forget your oil B)

    Ready to ride by 8:30

    Cheers
    Murph

    #176336

    Paul
    Member

    Murph, I’m out mate – sorry.
    I did a long recce ride today with Training Wheels, just got home now and I’m knakkered!

    Have a good ride, I’ll be waiting for the report and photos of the widow maker.

    Cheers.

    #176348

    No worries Wikd
    Maybe next time mate

    And then there was seven ;)

    Cheers
    Murph

    #175400

    Dwayne O
    Member

    Caught up with Murph & Posse at the Gap Servo today, they were a tad later than they had expected to be getting there :laugh:
    They were saying goodbye to one who wanted to keep the brownie pts at a respectable level :laugh: and the rest were eager to take on the “AMAZON” At least Smuph & Gilli were anyway :woohoo:

    Murph`s back was giving him grief and some panadol were on the menu while they rested :blink:

    BTW, the Widowmaker Challenge of the morning run proved to be a winner, as noone made it uo first crack,,, SO Murph`s offer of a free beer went to waste :laugh: :laugh: :laugh:

    Can`t wait to hear the results of the AMAZON MSSION :woohoo:

    It was good to see young Gilli again too,,, it had been a long time since he helped me out bigtime in the Wattos 18 months or so ago ;)

    #176357

    Mal
    Member

    Good stuff Eagle.

    I’m sure we’ll hear all about when the ‘Turkeys’ come out to play. :laugh:

    Sounds like a ture murphsberg if no one could make it up one of his hills first go.

    #175401

    Dwayne O
    Member

    :laugh: He didn`t even make it up first crack himself :laugh:
    True Murph at it`s best I`d say,,,,

    And that was all before Wangi Rd :blink:

    #176358

    ian
    Member

    was that you at the servo with a crook knee, Eagle 02

Viewing 15 posts - 31 through 45 (of 47 total)

You must be logged in to reply to this topic.