Mick’s new BRP

Home Forums Your Garage Mick’s new BRP

This topic contains 80 replies, has 0 voices, and was last updated by  Anonymous 15 years, 9 months ago.

Viewing 15 posts - 31 through 45 (of 81 total)
  • Author
    Posts
  • #139100

    Mick D
    Member

    Back on topic… My new XR.

    I just took her for a ride out to Moose’s place. With the road tyres ,she is real toey on the gravel road!!!

    #139101

    Greg
    Member

    micknmeld wrote:

    Quote:
    Quote:

    But I will tell you, it still makes a good bar table and ash tray holder for the shed.;)

    Keep laughing laughing boy, I reckon I will have access to your bike for two hrs tomorrow, would you like me to record how hard it rev’s :laugh: or maybe a couple of rev limiter banging runs past your work, this can be prevented by a change in tack with your behaviour, and references to my beloved bike, your choice :ohmy:

    TB

    #139103

    glenn
    Member

    Trailboss wrote:

    Quote:
    micknmeld wrote:

    Quote:
    Quote:

    But I will tell you, it still makes a good bar table and ash tray holder for the shed.;)

    Keep laughing laughing boy, I reckon I will have access to your bike for two hrs tomorrow, would you like me to record how hard it rev’s :laugh: or maybe a couple of rev limiter banging runs past your work, this can be prevented by a change in tack with your behaviour, and references to my beloved bike, your choice :ohmy:

    TB

    his bluffing mick

    #139104

    Mick D
    Member

    Trailboss wrote:

    Quote:
    micknmeld wrote:

    Quote:
    Quote:

    But I will tell you, it still makes a good bar table and ash tray holder for the shed.;)

    Keep laughing laughing boy, I reckon I will have access to your bike for two hrs tomorrow, would you like me to record how hard it rev’s :laugh: or maybe a couple of rev limiter banging runs past your work, this can be prevented by a change in tack with your behaviour, and references to my beloved bike, your choice :ohmy:

    TB

    Have you got a key to my lock that locks your bike to my bike?/??

    #139107

    Greg
    Member

    micknmeld wrote:

    Quote:
    Trailboss wrote:

    Quote:
    micknmeld wrote:

    Quote:
    Quote:

    But I will tell you, it still makes a good bar table and ash tray holder for the shed.;)

    Keep laughing laughing boy, I reckon I will have access to your bike for two hrs tomorrow, would you like me to record how hard it rev’s :laugh: or maybe a couple of rev limiter banging runs past your work, this can be prevented by a change in tack with your behaviour, and references to my beloved bike, your choice :ohmy:

    TB

    Have you got a key to my lock that locks your bike to my bike?/??

    I have two things going for me, one you said I should take it for a ride and suss it out for you, and you wouldnt go back on your word

    2nd in a shed I am sure I could cut through the cable, if that fails I will seek revenge and burn yours and rest more than a ash tray and a stubbie on the ashs :laugh:

    TB

    #139003

    David
    Member

    micknmeld wrote:

    Quote:
    I have a 1125ml bottle of rum in the shed so I’ll just get some coke.

    No worries I will be there with ice….shouldn’t be too hard in this weather:laugh: :laugh:

    I might get there early to do some wheelies past your work as well Mick….on your new bike of course:P

    #139116

    Mick D
    Member

    I think I might ride it to work in the morning……….:S

    #139119

    Can i have a go and do some supermotard slides out front of your work:huh: :blush: mite make front page material:ohmy: ;)

    #139120

    Dwayne O
    Member

    Tiny wrote:

    Quote:
    Can i have a go and do some supermotard slides out front of your work:huh: :blush: mite make front page material:ohmy: ;)

    :woohoo: :woohoo: :woohoo:
    I`m going to Wauchope tomorrow to watch this;)

    Nah, just kidding , Nice ride MickB)
    Ya better play it safe & commute to work on her mate;)

    #139121

    Mick D
    Member

    Tiny wrote:

    Quote:
    Can i have a go and do some supermotard slides out front of your work:huh: :blush: mite make front page material:ohmy: ;)

    EEEEEEKKKKKK!!!!!

    #139123

    Fez
    Member

    c’mon guys all this talk about wheelies and supamotard slides, you do realise it is ONLY a Honda. If it was a YAMAHA you could do all the above and more, BUT it is ONLY a Honda so just leave it in the shed. That way when all the bits fall off as you know they will you can find them.

    #139140

    Mick D
    Member

    Uncle Fester wrote:

    Quote:
    c’mon guys all this talk about wheelies and supamotard slides, you do realise it is ONLY a Honda. If it was a YAMAHA you could do all the above and more, BUT it is ONLY a Honda so just leave it in the shed. That way when all the bits fall off as you know they will you can find them.

    Go on Fester, rain on my parade why don’t you!! Yes it is only a Honda but I love it..LOL

    #139155

    glenn
    Member

    congrats on your new baby mick.

    the rest are only Jelous

    #139141

    Greg
    Member

    Uncle Fester wrote:

    Quote:
    c’mon guys all this talk about wheelies and supamotard slides, you do realise it is ONLY a Honda. If it was a YAMAHA you could do all the above and more, BUT it is ONLY a Honda so just leave it in the shed. That way when all the bits fall off as you know they will you can find them.

    Hey Fester when are you going to back all this big talk and come on a ride :laugh: :laugh: :laugh:

    TB

    #139164

    Anonymous

    Glad you like it Mick, what’s the power difference like compared to the HRC kitted 630?

Viewing 15 posts - 31 through 45 (of 81 total)

You must be logged in to reply to this topic.