old & new

This topic contains 9 replies, has 0 voices, and was last updated by  michael matthews 13 years, 4 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #100694

    I’ve just finished my man therapy fitting new radiators ,changing oil & filter and a general check over bike only got to fit new front m21 tyre and all ready for coffs :woohoo: :woohoo:
    [attachment=2960]IMG_0190.jpg[/attachment]
    old &new
    [attachment=2961]IMG_0191.jpg[/attachment]
    old&new

    #211641

    Greg
    Member

    Where did the radiators come from BB? Are they from eBay?

    TB

    #211643

    they came from a shop called just performance in melbourne
    BB

    #211644

    Dean
    Member
    Trailboss wrote:
    Where did the radiators come from BB? Are they from eBay?

    TB

    I would say TB that they came from a BRP :laugh:

    as if you didnt know

    ollie

    #211658

    Greg
    Member
    Ollie wrote:
    Trailboss wrote:
    Where did the radiators come from BB? Are they from eBay?

    TB

    I would say TB that they came from a BRP :laugh:

    as if you didnt know

    ollie

    They didn’t you idiot Ollie they are new for a BRP :huh: The reason I asked cause there are a heap of cheap ones flooding the market recently and guys have been having heaps of problems with them that’s why I asked. The welds and the angles the tanks are at also made me ask

    TB

    #211662

    They told me that a 2000 model is different to other models these bolted straight on

    #211664

    Greg
    Member

    How did the jetting recommendations go BB? Get the air screw out to about to 2 &1/2 turns? I have one of those 65s jets we spoke about and can bring it to Coffs if ya want? I can throw it in, only takes about 10 mims if you know the trick ;)

    TB

    #211895

    Hi TB i have been busy but i have changed the air screw 2 1/2 turns out and checked the needle clip position ,it’s on the second clip down ,I haven,t started it yet will let you how it goes tomorrow night. ;)
    If you dont mind brining that jet i would appreciate it just in case 😆

    BB

    #211898

    Greg
    Member

    Will do mate ;)

    TB

    #211899

    Hi TB i have just pulled the carbi apart and checked the jets again it has already had a 165 main & 65s pilot ,what through me off with the numbers was reading the jet sizes on your bike . So i wont need that jet . I am taking it for a ride tomorrow so with the air screw turned out 2 1/2 turns out and the needle clip on the 4 position it should be all good thanks.

    BB

    (i might of had a couple of bundies that night )

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.