Go To...

PIVOT PEGZ bulk buy.

Home › Forums › Current Sponsor Deals › Current Sponsor Deals › PIVOT PEGZ bulk buy.

This topic contains 147 replies, has 0 voices, and was last updated by  Greg 15 years, 11 months ago.

Log In Register Lost Password
Viewing 15 posts - 106 through 120 (of 148 total)
1 … 7 8 9 10
  • Author
    Posts
  • November 2, 2009 at 4:46 am #159076

    Craig Hatton
    Member

    Trailboss wrote:

    Quote:
    Hatto wrote:

    Quote:
    micknmeld wrote:

    Quote:
    Geezus….and I thought I lived at upper kickatinalong!!!
    Where are you at Hatto??

    Hi Mick
    Still nothing in the mail today, wonder if you could chase up or give me a contact to see if they have the right address for me

    cheers hatto

    Contact Fathead @ Battyes

    02 95435133

    TB

    cheers tb,
    having a dumb day, just thought about going back through thread to find number

    Hatto

    November 2, 2009 at 4:56 am #159077

    Craig Hatton
    Member

    Hold my last post,
    I just coathangered the postie as he went past, got my pegs…Yahoo

    Great job Battyes, Mick and Old Bulls
    cheers hatto

    November 2, 2009 at 5:18 am #159078

    glenn
    Member

    Pegs that pivot have arrived :) :) :) :) :) :) :)

    Thanks all involved in the special..

    Anyone got a picher of these things fitted on a narny..especially where the standard spring goes on the new pegs?????

    November 2, 2009 at 5:19 am #159079

    Mick D
    Member

    Hatto wrote:

    Quote:
    Hold my last post,
    I just coathangered the postie as he went past, got my pegs…Yahoo

    Great job Battyes, Mick and Old Bulls
    cheers hatto

    Did you have to unbolt them of the postie’s bike??

    November 2, 2009 at 5:20 am #159088

    Mick D
    Member

    Boony wrote:

    Quote:
    Pegs that pivot have arrived :) :) :) :) :) :) :)

    Thanks all involved in the special..

    Anyone got a picher of these things fitted on a narny..especially where the standard spring goes on the new pegs?????

    They should fit in the same way the springs fit your old pegs. They did on the XR.

    November 2, 2009 at 5:20 am #159089

    Greg
    Member

    Boony wrote:

    Quote:
    Pegs that pivot have arrived :) :) :) :) :) :) :)

    Thanks all involved in the special..

    Anyone got a picher of these things fitted on a narny..especially where the standard spring goes on the new pegs?????

    A picher, I will google that hold on :laugh:

    November 2, 2009 at 5:21 am #159091

    glenn
    Member

    you know what i mean!!! :woohoo:

    November 2, 2009 at 5:22 am #159092

    Greg
    Member

    Here Boony

    Picher was a city in Ottawa County, Oklahoma, United States. It was formerly a center of lead and zinc mining. The population was 1,640 at the 2000 census. Discoveries of ground contamination and the possibility of a cave in of mines under the city have prompted all of its population to evacuate, and the nearby town of Cardin is following suit. The town is within the boundaries of the Tar Creek Superfund site.

    Hope that helps cant see how it will but.

    TB

    November 2, 2009 at 5:24 am #159093

    Greg
    Member

    Farking hell Boony I will bet you haven’t even sat down and tried to work it out have you, come on mate if Moto can fit a set and I think he did his own surely you can or can even try :huh:

    TB :blink:

    November 2, 2009 at 5:26 am #159094

    glenn
    Member

    you now officially have way to much time on your hands,,please recover from your op quicker,, :woohoo:
    now back to my question,and replace picher with photographic evidance please.

    November 2, 2009 at 5:27 am #159096

    glenn
    Member

    Trailboss wrote:

    Quote:
    Farking hell Boony I will bet you haven’t even sat down and tried to work it out have you, come on mate if Moto can fit a set and I think he did his own surely you can or can even try :huh:

    TB :blink:

    I havent even got them out of the box yet :) :) :) :) :) :) :)

    November 2, 2009 at 5:29 am #159090

    Craig Hatton
    Member

    micknmeld wrote:

    Quote:
    Hatto wrote:

    Quote:
    Hold my last post,
    I just coathangered the postie as he went past, got my pegs…Yahoo

    Great job Battyes, Mick and Old Bulls
    cheers hatto

    Did you have to unbolt them of the postie’s bike??

    No, but another day and I reckon I would have, he even rides on some days with an M2R helmet

    hatto

    November 2, 2009 at 5:31 am #159097

    Greg
    Member

    Boony wrote:

    Quote:
    you now officially have way to much time on your hands,,please recover from your op quicker,, :woohoo:
    now back to my question,and replace picher with photographic evidance please.

    I have fitted DR ones to the project DR and the springs fit the same as the originals, fark its one of the easiest things I have ever done on a bike and think fitting grips is harder to be honest, have you even tried, had a look yet?

    SAME AS THE ON THE BIKE THINK ABOUT IT THE HAVE TO BE THE SAME DONT THEY THEY MOUNT TO THE SAME THING ON THE BIKE DONT THEY

    TB

    AND NOW I SEE YOU HAVENT EVEN TAKEN THEM OUT OF THE BOX YOU PAN HEAD

    November 2, 2009 at 5:36 am #159099

    Mark Bunting
    Member

    I hope you’re all having fun with your new bike bling. Sadly mine are still in transit. Cure you Australia Post Cure you.

    November 2, 2009 at 5:38 am #159098

    Greg
    Member

    Boony wrote:

    Quote:
    I havent even got them out of the box yet :) :) :) :) :) :) :)

    You Dick :laugh: :laugh: :laugh:

    TB :laugh:

  • Author
    Posts
Log In Register Lost Password
Viewing 15 posts - 106 through 120 (of 148 total)
1 … 7 8 9 10

You must be logged in to reply to this topic.