Go To...

repairs to bent valves

Home › Forums › Tech Help › Tech Help › repairs to bent valves

This topic contains 1 reply, has 0 voices, and was last updated by  Greg 13 years, 10 months ago.

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 12, 2011 at 9:02 pm #100174

    bryan wilkinson
    Member

    hi guys,trying to find a place out near penrith to repair the head ,its off a drz400 18000kms 2008 model..it has a bent valve n the sprocket on the cam shaft has moved on the key way by 20 deg,,any help would be helpfull,,

    July 12, 2011 at 9:13 pm #204773

    Greg
    Member

    Hi Wilko welcome to the site. I recently did the top end on Fishes DR 400 and had the cylinder head work done by Tekniks at Penrith. They did a good job to the head, did the valves and got all the gaskets etc I needed to put it back together. Being a OBT sponsor Fish got a discount.

    Tekniks logo scrolls across the top of all pages here, click on it for contact details tell them your a member and TB sent you

    How about going to the intro section and doing an intro, tell us about you, where you ride etc

    TB

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.