ROXSpeed FX Pivoting Risers

[GregMember]

I recently set a bike up for me to ride using a set of these ROXSpeedFX Clear Anodized 2″ Rise x 1 1/8″ Stem Clamp x 1 1/8″ Handlebar Pivoting Risers 2″ center to center rise

I fitted a set to the 750 Super tenere of Steve’s I rode at the Scrapheap ride. They can be used with Fat bars or 7/8 bars, you can roll them forward, backwards etc awesome setup

You can see the adapters here for 7/8 bars, take them out for Fat bars

Here on the Tenere

I reckon these would be great for tall riders given that you can go up and forward and are easy to adjust

Get a set from Adventure Moto and get looked after because your an old bull trailrider

TB

[David MasonMember]

Been running these for about three years.
First in my DRZ and now on my DR650.
Top bit of gear.
Another advantage is if you fall and do bend your bars you can loosen them off and rotate one forward and the other backward to bring them back closer to normal position.
Did that to my mates bike(also using Rox Risers) when we still had three days riding to get home with bent bars.

[malleeMember]

Been looking at getting a set of these for the KLR650, as at the Scrapheap rally and also in the tight stuff I notice I need some more height and the standard bar risers will bring the bars back with the angle of the steering head.
With these you can adjust the bars so they are the same distance as you were in the seat before just heigher in the bars.
Good idea.
Mallee

[GregMember]

mallee wrote:

Been looking at getting a set of these for the KLR650, as at the Scrapheap rally and also in the tight stuff I notice I need some more height and the standard bar risers will bring the bars back with the angle of the steering head.
With these you can adjust the bars so they are the same distance as you were in the seat before just heigher in the bars.
Good idea.
Mallee

Get hold off Steve or Janice at Adventure Moto mate clicky click here

TB

[Author]

Posts