Single Saturday 17-8-13

Home Forums Ride Gatherings NSW Rides Single Saturday 17-8-13

This topic contains 8 replies, has 0 voices, and was last updated by  Ben Guest 11 years, 8 months ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #103132

    We will be riding singles this Saturday. B)
    Starting from home and doing all the singles out through Awaba and beyond.
    Mostly grade 3 with a couple of challenges thrown in for good measure.
    Tim wants to finish his Dandelion Creek track which I know will be bloody hard. 👿
    The challenges don’t have to be done, but we will probably be at the Creek track for a little while.
    All are welcome
    Ready to ride by 8:30am
    Will PM all those who are keen
    Riders:-
    Thrillseeker
    Tim
    Murph

    #247974

    Ben Guest
    Member

    Keen.

    We can ride out my way and do my creek tracks also if you boys are keen. G5 at times but you could go around them also if needed.

    Thrillseeker

    #247979

    I knew this would happen :dry: I would be keen but will be on the adv ride … have fun.

    #247981

    Your on the list Thrillseeker. B)

    Your not MrSquiggle. :( :pinch: Next time, mate.
    Cheers
    Murph

    #247980
    Thrillseeker wrote:
    Keen.

    We can ride out my way and do my creek tracks also if you boys are keen. G5 at times but you could go around them also if needed.

    Thrillseeker

    Sounds the go, Thrillseeker.

    #247975

    Adam Rodgers
    Member

    I’d have been up for this one however I’ve just gotten my bike back together and want to test it before I venture too far away from home :unsure:

    Adam.

    #248107

    Only one way to test it Adam.
    Ride it. :woohoo: :woohoo:
    Cheers
    Murph

    #248118

    Ben Guest
    Member

    No better way to test your bike then a Murph ride ;)

    #247976

    Adam Rodgers
    Member

    The bike is capable ;) It’s the rider that isn’t :whistle: :pinch: :laugh:

    Adam.

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.