Go To...

Super Commuter Woes

Home › Forums › Kawasaki Bikes › Kawasaki Bikes › Super Commuter Woes

This topic contains 41 replies, has 0 voices, and was last updated by  Dwayne O 15 years, 11 months ago.

Log In Register Lost Password
Viewing 15 posts - 16 through 30 (of 42 total)
1 2 3
  • Author
    Posts
  • September 6, 2009 at 8:01 am #150430

    Dwayne O
    Member

    Is it BBQ time as well ? Are ya bringing Sal & the boyz ?

    I will let ya know closer to friday if I will be there for the repairs (work wise), should be ok if its afternoon/evening;)
    Am keen for the BBQ after work if thats the go, we will supply the food as discused earlier!!

    Don`t argue, just agree, Bosslady has spoken

    September 6, 2009 at 8:09 am #151208

    Greg
    Member

    Traveling on my own and low key mate, I am only coming up to do your bike so you can ride at Louee and I am going for a ride on Sunday.

    Sort it out with Dan and Kylie I dont want to put them out anymore then we have to

    TB

    September 6, 2009 at 8:12 am #150431

    Dwayne O
    Member

    Ok, We will see what happens;)
    I will sort somethin` out,,,

    Cheers

    September 6, 2009 at 8:14 pm #150451

    Anonymous

    EAGLE`02 wrote:

    Quote:
    It gets wrung a fair bit I can tell ya:P

    Its not the bike that gets wrung is it eagle, you chicken choker :laugh:

    September 8, 2009 at 9:55 am #150432

    Dwayne O
    Member

    Ha Ha Ha,

    Hope ya choke on ya own FurBall ya Furry Nut Licker :P

    September 9, 2009 at 12:24 am #151554

    Anonymous

    So when are you dropping your bike round to Dan’s Eaglemeister?

    September 9, 2009 at 12:32 am #151634

    Greg
    Member

    Friday evening I heard

    TB

    September 9, 2009 at 2:08 am #151637

    Anonymous

    I dunno, he told me in a PM he might see me at Dan’s on Saturday……

    September 9, 2009 at 2:09 am #151640

    Greg
    Member

    Yeah but I asked for the bike to be dropped of early so its cold is all, you asked when its being dropped of, he will came back on saturday when I do the job

    TB

    September 9, 2009 at 2:15 am #151641

    Anonymous

    Ahhhhhhhhh…….

    September 10, 2009 at 2:12 am #151643

    Greg
    Member

    Bring your shitter down Moto and I will tip toe through the tappets on Saturday ok, wont take long you or beagle can remove the seat etc ok, and dont worry about special feeler gauges I have everthing we need

    TB

    September 10, 2009 at 4:33 am #151880

    Anonymous

    I meant shimming the valves, I can measure the tolerances. That said, I do have to bring the trailer down anyway so could just stick the bike on too….

    September 10, 2009 at 6:02 am #151950

    Greg
    Member

    Moto wrote:

    Quote:
    I meant shimming the valves, I can measure the tolerances. That said, I do have to bring the trailer down anyway so could just stick the bike on too….

    As I explained on the phone we need to measure the clearances before we shim or find out if it even needs shimming and then what shims we need. You also don’t have any shims, so with that in mind and the fact you said no on the phone and maybe here I say make your bloody mind up or forget the trailer part you can stick the bike up your (horn sound) !! :laugh:

    TB

    September 10, 2009 at 6:18 am #151976

    glenn
    Member

    sounds like yous know what your talking about there gents

    September 10, 2009 at 12:06 pm #150433

    Dwayne O
    Member

    Super Commuter is tuckrd safe in the D`s Pits ;)
    Dropped it off tonite,,,

    Thinking of making up an OBT Workshop sign :laugh: :laugh: :laugh:

  • Author
    Posts
Log In Register Lost Password
Viewing 15 posts - 16 through 30 (of 42 total)
1 2 3

You must be logged in to reply to this topic.