sw motech centre stand for Tenere

Home Forums Tech Help Tech Help sw motech centre stand for Tenere

This topic contains 5 replies, has 0 voices, and was last updated by  Greg 11 years, 10 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #102871

    Bits that I’ve ordered for my new Tenere have started arriving :)
    Last night I fitted the SW Motech centre stand I ordered from “Off the Road”
    It went on fine, but I’ve noticed it doesn’t have a rubber grommet to stop it hitting the rear linkage.
    Is this normal ? Or is it missing a part ?
    Other thing I’ve found is that the new chain has stretched ( a lot ) & is rubbing on the centrestand. Quick adjustment tonight will sort that !

    Any help most appreciated.

    Cheers,
    Bucky

    #243626

    Greg
    Member
    Bucky wrote:
    Bits that I’ve ordered for my new Tenere have started arriving :)
    Last night I fitted the SW Motech centre stand I ordered from “Off the Road”
    It went on fine, but I’ve noticed it doesn’t have a rubber grommet to stop it hitting the rear linkage.
    Is this normal ? Or is it missing a part ?
    Other thing I’ve found is that the new chain has stretched ( a lot ) & is rubbing on the centrestand. Quick adjustment tonight will sort that !

    Any help most appreciated.

    Cheers,
    Bucky

    Ummm not sure about the grommet Bucky a picture would help.

    Yes the chain appears to hit when sitting there without the rider on board (when correctly adjusted) but doesnt when you are on it.

    Unless your 60kilos and dont plan on putting luggage on board get your suspension done, makes the biggest difference and helps with the chain on the centre stand

    Welcome to the white club BTW

    TB

    #243627

    John
    Member

    Bucky,

    Had a look at mine, don’t know the stand brand but here’s some comparo photo’s.

    Yes the bike is dirty, I ride it. Polishing is for HD riders… ;)

    The rubber grommet is in the top left touching the swing arm when the stand is up. Chain doesn’t touch anywhere.

    IMAG0366.jpg

    Another view
    IMAG0367.jpg

    Centre stand up
    IMAG0368.jpg

    Rubber grommet when stand down
    IMAG0370.jpg

    #243628

    Thanks TB

    With the centrestand – every other bike I’ve had has had a rubber stopper on the centrestand to hold it off the chassis / stop it banging when you hit bumps etc. The SW Motech didn’t come with one.

    Will look into the suspension when finances permit !

    Cheers,

    PS – Glad I got picked white. Not many around & they look the business !

    #243631

    Cheers jtb,

    Your centre stand completely different design to SW Motech one I’ve fitted.

    Thanks anyway,

    #243632

    Greg
    Member

    Yeah his is different to mine. I will take some photos of mine on the weekend and if you can get a few photos of yours up it would be good

    TB

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.