This topic contains 37 replies, has 0 voices, and was last updated by 
-
While its apart see if you can shoehorn in the triple out of the MT-09
Can you be the new prototype middlewieght …. comon yamaha!Managed again to slip the chain on Mothers day as well and spent a few hours working on the bikes (well mine only today) Some of the finer detail work today like wiring the USB ports, the GPS power etc. Also I lock wire a few things on this bikes like the stand bolts and the drain plug for piece of mind. I fitted the water pump protector and the bash plate. The bash plate requires the engine mount bolts etc. to be swapped out. I did the mod I do to them behind the speedo to prevent a possible rattle at a later date
Stripped the headlight assembly to do the speedo mount modification
Sump plug and stand bolts drilled and lock wired
Gear stick with hammer head extension
I also lock wire the stand springs
Brake pedal extension, brake snake, water pump protector and bash plate
And I fitted my tall clear screen
More later
The hard earned will need to be transfered this week or there will be a good low miles known bike back on the market with at least two others after it. Brace yourself for a phone call with account details Michael
:laugh:TB
TrailBoss wrote:The hard earned will need to be transfered this week or there will be a good low miles known bike back on the market with at least two others after it. Brace yourself for a phone call with account details Michael :laugh:
TB
Oh well, if worst comes to worse, there is a cheap low kms Husky with all the goods up for grabs at the moment.
:pinch:A bit more form last nights effort.
Swingarm was removed from both of the bikes, the old one had the swingarm bushes and bearings repacked and the new one packed for the first time. I fitted the new chain from the new bike to the old one, including new chain and sprockets. I also fitted the new cush drive because I wanted the keep the twin race bearing cush drive I have
New one swingarm out
Standard Sachs shock to be removed to go into the old bike
My Ohlins fitted to the new bike
A new 46 tooth rear sprocket and a gold RK chain
Head light protector, tank back on
Mick’s finished and ready for pick up, oh after its paid for
TB
Almost finished, just waiting for the new Barrett exhaust system
TB
That looks great TB
Whats that seat :unsure:
james wrote:That looks great TB
Whats that seat :unsure:
Its a concept seat mate from Adventure Moto
TB
You must be logged in to reply to this topic.