Go To...

Tenere hub mod

Home › Forums › Teknik’s Motorsport Forum › Teknik’s Motorsport your one stop suspension and performance engine shop › Tenere hub mod

This topic contains 6 replies, has 0 voices, and was last updated by  Steve Taylor 12 years, 1 month ago.

Log In Register Lost Password
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 25, 2013 at 2:58 am #103050

    Nick Dole
    Member

    I’ve been scouring the bearing listings and come up with an obscure double row bearing for the Tenere hub mod. It’s 21mm wide, stock is 15mm.
    Will get one together and try it out.
    null_zpsc14e4470.jpg

    July 25, 2013 at 3:36 am #246932

    Greg
    Member

    Book me in Eddy, as your test dummy let me try one

    TB

    September 8, 2013 at 7:25 am #246937

    Steve Taylor
    Member

    TB….I guess you will be using a 4304-2RS..??

    RGDS

    SEAHORSE

    September 8, 2013 at 8:14 am #249431

    alan
    Member

    that bearing looks like it would take a good load

    September 8, 2013 at 8:18 am #246933

    Nick Dole
    Member

    Seahorse,
    I’ve used the SKF bearing so far but it’s pricey at $117 from SKF. There is a Chinese equivalent at $55 but we would all rather not go there.
    Suggestions?

    September 8, 2013 at 8:33 am #249432

    jim cady
    Member
    Teknik wrote:
    Seahorse,
    I’ve used the SKF bearing so far but it’s pricey at $117 from SKF. There is a Chinese equivalent at $55 but we would all rather not go there.
    Suggestions?

    Whats the whole job cost Nick :unsure:

    Cheers James

    September 8, 2013 at 9:05 am #249433

    Steve Taylor
    Member
    Teknik wrote:
    Seahorse,
    I’ve used the SKF bearing so far but it’s pricey at $117 from SKF. There is a Chinese equivalent at $55 but we would all rather not go there.
    Suggestions?

    I would prefer to use SKF if possible ….I will try one of our engineering suppliers for a price next week…

  • Author
    Posts
Log In Register Lost Password
Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.