Go To...

Valve replacement crf250x

Home › Forums › Tech Help › Tech Help › Valve replacement crf250x

This topic contains 3 replies, has 0 voices, and was last updated by  Greg 16 years ago.

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 28, 2009 at 11:20 am #96094

    Matt Baker
    Member

    anyone got any recommendations on where to take a cfr250x to get the valves done in the Sydney or Wollongong area?

    March 28, 2009 at 11:37 am #127173

    Greg
    Member

    The guy that did Chops head and welded by crankcase, he is at Sutherland and does real good work, I would recommend him, Greg Ball Engineering I think it is 100% recommend him and cheaper than Rams

    TB

    Found his contact details

    GREG BALL MOTOR CYCLE ENGINEERING

    002 95213488

    2-4 ETHELL RD
    KIRRAWEE
    NSW
    2232

    March 28, 2009 at 11:38 am #127174

    Matt Baker
    Member

    cheers TB, thats close enough to home

    March 28, 2009 at 11:49 am #127175

    Greg
    Member

    When I was there he had parts send to him from the states to be repaired and then be sent back to the states! He is close but I would send my stuff to him even if he wasnt.

    Glad I could help

    TB

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.