Go To...

Wanted: Complete Cylinder head for a 2001 YZ125

Home › Forums › For Sale › For Sale › Wanted: Complete Cylinder head for a 2001 YZ125

This topic contains 4 replies, has 0 voices, and was last updated by  Gavin Matthews 14 years, 1 month ago.

Log In Register Lost Password
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 3, 2011 at 1:11 am #99978

    Gavin Matthews
    Member

    Hi

    I am after a complete cylinder head for a 2001 YZ125, I am told a 00′ or 02′ will fit also. Basically I don’t have anything for the cylinder as I bought the bike without it, so I need to get a fully assembled cylinder with valve assembly’s, power valve mech etc and the cover plates. Have tried a few wreckers without luck, plenty of cylinders but none with all the other bits.

    Any help in sourcing these would be much appreciated

    Regards
    Gav

    June 3, 2011 at 10:13 am #202484

    Mick D
    Member

    Try googling Eric Gorr Forward Motion in the States. He might have a fully recond one at about the same price you’d pay for one at the wreckers.

    June 3, 2011 at 12:04 pm #202495

    Gavin Matthews
    Member

    Thanks will get him a try.

    June 3, 2011 at 12:25 pm #202498

    Mick D
    Member

    Here you go scroll down to the yamaha section on his garage sale page. He has the lot for the 125 including gaskets and piston for US$395
    I have gotten a few barrels etc from Eric and can vouch that he has good stuff.
    Erics Garage sale Click here

    June 3, 2011 at 12:43 pm #202499

    Gavin Matthews
    Member

    Lol yer I just emailed him about that one! Just wanted to see if it had the valve assemblies etc in it. Yer he has plenty of good feedback in quite a few forums so thanks again I hope that one will do the trick

    Regards
    Gav

  • Author
    Posts
Log In Register Lost Password
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.