What did you do to your bike today?

[jim cadyMember]

Trailboss wrote:

EAGLE`02 wrote:

Easy job to do the sprockets & chain mate, just a few hints to help you along.

With chain still on, Use a piece of pipe (I use trolley jack handle) thru the rear wheel to lock under the swingarm.
This enables you to undo the front sprocket nut/bolt (different bikes have different sprocket setups).
Always use new bolts and nuts when fitting the new rear sprocket, don`t overtighten sprocket bolts because they will stretch :whistle:

Fit new front sprocket but nut/bolts hand tight only.

Fit new chain being careful to set the correct length to suit your bike , use chain breaker to remove links (I have used a grinder to grind rivet heads in the past) A breaker is a better investment $50 for a toolbag size one.
Be sure to install the master link with the open end of the clip facing the rear of the bike when it passes over the front sprocket.

Retension the front sprocket nut/bolt by using the pipe method again, but this time locking on the top of swingarm.

Use a small screwdriver in between the chain & sprocket, turn wheel in reverse and tension axle nut, then remove screwdriver,,,

ALL DONE

Sorry I have no pics to explain these, might be able to take some examples later today if you need James

Ring me James :laugh: :laugh:

TB

Will get in touch over the next couple of days guys thankyou really looking forward to the weekend festivities :woohoo: :woohoo:

Thankyou James

[Harold WithingtonMember]

Ripped the suspension out this morning and sent it down to Tekniks to get it re valved and lowered for my short ass
[attachment=4214]image_2013-10-29.jpg[/attachment]

[Shane CosgroveMember]

Ordered a shiny new barrett pipe for the triumph today, fingers crossed for the weekend

[malleeMember]

Over the last few weekends have fulled the tank off the KLR and cleaned the carby because going out the the Far Cain rally it felt more gutless then normal, raised the needle a little bit, fitted a fuel filter and when fitting the side cover I put some packing in the jap to reduce to air been sucked into the air filter from the rear wheel. Went for a short burst last week and it feels a bit better but still a KLR

Last night had the Triumph 800 deno bike and went for a 60k spin :woohoo:
Now to ride the Yamaha 660 and I think KLR will be on the outter :ohmy:

Mallee

[MichaelMember]

I have just had some new toys put on the Tenere

Pivot Pegs

Barrett Twin System

And Wolfman Racks

Thanks to TB for doing all the work of putting everything on.

And a big thank you to the site sponsors for providing these great products and looking after me

Jason Barrett from Barrett Products and Steve the Wolfman from Adventure Moto.

Thanks Guys

Cheers

Kind Strucky

[murph the surfMember]

Black Polished Stone
LOOKS GOOD
I still don’t understand
Its all cool

[murph the surfMember]

Murph the surf wrote:

Black Polished Stone
LOOKS GOOD
I still don’t understand
Its all cool

WHAT!!!!!

[murph the surfMember]

Gilian, I am gone……………………
Trash Talk
Did ya know:::::::::::::::::::::::::::::::::::::::
Neil Young

Was the KING, not of stoned people
Just put your arms around me
Cheer
Murphio

[murph the surfMember]

Evening
Ya””””l
Jah, rasta
What the juck is going on.//

STM
Great photo
If it were me, hangin it da wall
You need to go West, an offer that does not go out easily.
BYE
Ya’all
Cheers
Murphinski

[murph the surfMember]

FFFFFFFFFFFFFFFFFUcrkk
I never meant what I was thinking
Guess I don’t give a shit
Gotta love the fuckin Drunk
Stil workin on those last words
Gotta love the fuckin Drunk
CUN’T BETTER DAT
Hope ya’s all better than me???????????????
MAYBE WE NEED AN ob TO DO SOMETHING DIFFERENT 👿 👿 👿
sEEYA’S IN another life, Mannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
Cheers
Murphio

[Shane CosgroveMember]

Youve inspired some genuine australian poetry strucky.

Exhaust looks great BTW, my barrett pipe for the triumph should arrive tomorrow :whistle: looking forward to bolting it on and remaping the fuel injection at brisans :woohoo: :woohoo: few more ponies for my “cant wheelie for shit” power wheelstands coz HP fixes stuff 👿

[JoeMember]

Fitted new tyres on the kato,
[attachment=4231]DSC_0092.jpg[/attachment]
ready for the weekend ride

[Harold WithingtonMember]

Just got home and fitted suspension that Tekniks lowered and re valved for me
Looks good so far I can touch the ground at least

Just have a little head shake on the hwy and grip has gone on the corners in the scrub so I’ve got a couple of days tweaking the clickers, if this fails I’ll give them a call for some advice

Verry happy with their service

[DeanMember]

put the wiring back on the RMX only taken me about 5 years since I stripped it down :blush: Engine is in, finally got spark,that took two days and lots of head scratching to work thru,suspension done both ends. Now all I have to do is wheels plastics Carby brakes and chain/sprockets, hopefully Kick her in the Guts and ringa ding ding :laugh:

Ollie

[Nick DoleMember]

Give me a call if you can’t get that KTM right.
Nick

[Author]

Posts