Go To...

which oil viscosity for Ten XT660z with T-Valves ?

Home › Forums › Teknik’s Motorsport Forum › Teknik’s Motorsport your one stop suspension and performance engine shop › which oil viscosity for Ten XT660z with T-Valves ?

This topic contains 3 replies, has 0 voices, and was last updated by  Anatoliy YAROSHENKO 11 years, 4 months ago.

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 29, 2013 at 1:15 pm #102546

    Anatoliy YAROSHENKO
    Member

    Hi all,
    Just ordered V4S valves for Tenere XT660z. For standard fork I am using 10w fork oil.
    Which viscosity better to use after valves installation ?

    Regards
    Anatoliy

    July 17, 2013 at 1:02 am #238858

    Nick Dole
    Member

    Hi, pretty sure you called us and asked but for the record we use 10wt. Did you get them in and working?

    December 3, 2013 at 11:27 am #246179

    Anatoliy YAROSHENKO
    Member

    Hi,
    just for info: installed 4 month ago in my xt660z.
    With
    – 5W oil
    – 3*1.5mm “slow damping”
    – +50% in “quick damping”
    – stock springs (my weight 87kg)
    May be it is a wrong config, but it works for me.
    Regards

    December 6, 2013 at 7:57 am #238859

    Nick Dole
    Member

    Well, not what we would do but it you like it that’s all that matters

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.