WR Forks 2006 to 2011

This topic contains 9 replies, has 0 voices, and was last updated by  Greg 13 years, 8 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #100126

    Ladies and Gentlemen,

    If you are the owner of a 2006 to 2011 Yamaha WR 250 or 450, we have a Christmas in July special for you!

    On my desk are 10 sets of Factory KYB internals that will fix your ailing WR fork! Don’t ask how we got them, but if you haven’t already put in our T-Valve kit, these will give you the same improvement as our

    The Deal – $250 installed. That includes a fork service, custom re-valve and seals… drive away no more to pay – so to speak. Normally our fork kits are $198 + $220 installation + seals and wipers (about $80), so this is HALF PRICE!

    Call us to book – 02 4732 2626 – because once we take the 10 bookings their are gone!

    ALSO – in July we are giving 20% off everything – springs, service work, upgrade kits, everything!

    See us on facebook! http://www.facebook.com/TeknikRacing

    Merry Christmas…
    Evil Rudy

    #204198

    Mick D
    Member

    Hey Ruddy. Will they fit a 09 YZ250F?

    #204204

    Sorry Mick, they fit single chamber only…

    #204199

    gazmac
    Member

    Rudy please put me down for a set of those i think thats what i need to bring my bike back to the land of the living. MACKA.

    #204200

    Hi Rudy can you please put me down for one of the WR fork kits thanks , will ring next week

    #204240

    TONY.
    Member

    im interested in these where is the shop located?
    do you have a website other than face book?

    #204260

    Greg
    Member
    TONY. wrote:
    im interested in these where is the shop located?
    do you have a website other than face book?

    Shop is in Penrith, click on their add / icon / name sliding across the top of any page here on the site and it will take you to their site. Oh and Google is always your friend :)

    TB

    #204201

    Starting lineup;

    Macka
    Phelixpremixer
    Tony

    3 down 7 to go…

    Rudy

    #204202

    Mike Wyeth
    Member

    Hi Rudy,

    I’d be interested in the deal for my ’11 450:cheer: only problem is i’m up on the sunshine coast:(
    Is the kit something i could fit ?

    #204203

    Hey Mike, our normal t-valve kits is a DIY job ($199). The kit we’re talking about here is in house only, but the $250 gets you the kit, a service, and a re-valve including seals.

    We can arrange to have them picked up with our courier service and returned to you fresh as a daisy and working a treat.

    Give us a call in the office. 02 4732 2626

    ER
    xo

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.