Go To...

wr wont start in gear

Home › Forums › General Bike Talk › wr wont start in gear

This topic contains 31 replies, has 0 voices, and was last updated by  Matt Baker 10 years, 11 months ago.

Log In Register Lost Password
Viewing 15 posts - 1 through 15 (of 35 total)
1 2 3
  • Author
    Posts
  • February 26, 2011 at 5:50 pm #99603

    Evan
    Member

    Me and a mate have 08 and 09 wr450 neither will start in gear,mine would when it was brand new for about 2000ks but another mate has an 06 and his will start in any gear anytime.It really sucks when your stalled on a steep hill.Does this happen to other bikes or Wrs?
    cheers Ev

    February 26, 2011 at 6:16 pm #197328

    Jason Anderson
    Member

    my 06 starts in any gear to Ev.I havent had any trouble.hope you get it sorted mate.DY4

    February 26, 2011 at 6:29 pm #197331

    Evan
    Member

    Mine is also very hard to get into nuertral it is almost impossible while running and even when its off you have to rock it to get it in

    February 26, 2011 at 6:43 pm #197332

    Greg
    Member

    Is the clutch disengaging properly EV. If you warm the bike up and turn it of and put it in 2nd gear can you push it? I doubt it from what you are saying.

    I would be checking the adjustment, if that’s ok I would be popping the clutch out checking the plate thickness, the steel plates arent warped and the fingers on the basket aren’t notched

    TB

    February 26, 2011 at 7:02 pm #197333

    glenn
    Member

    It`s stuffed ,,,Sell it!!!!!

    February 26, 2011 at 7:02 pm #197329

    Scott
    Member

    As TB said good chance its the clutch adjustment.
    I have had the same issue on mine, I was able to use the on the fly adjuster at the lever to get it sorted.

    February 26, 2011 at 7:03 pm #197334

    Evan
    Member

    At least it has a button:laugh:

    February 26, 2011 at 7:08 pm #197336

    Evan
    Member

    Tried adjuster no go How could the 09 plates be warped after 6 months but the 06 be fine?Does this happen to other makes ?

    February 26, 2011 at 7:40 pm #197335

    TheBoss
    Member
    Boony wrote:
    It`s stuffed ,,,Sell it!!!!!

    tech help rules

    It is the only forum with a simple rule

    February 26, 2011 at 8:24 pm #197337

    Alan Heather
    Member
    BellingenEv wrote:
    Tried adjuster no go How could the 09 plates be warped after 6 months but the 06 be fine?Does this happen to other makes ?

    ev you need a drz400 mate.:laugh: :laugh: :laugh:

    February 26, 2011 at 8:27 pm #197342

    alan
    Member
    bigger al wrote:
    BellingenEv wrote:
    Tried adjuster no go How could the 09 plates be warped after 6 months but the 06 be fine?Does this happen to other makes ?

    ev you need a drz400 mate.:laugh: :laugh: :laugh:

    that will fix it for sure :side:

    February 26, 2011 at 8:33 pm #197343

    Evan
    Member

    Id rather push my WR

    February 26, 2011 at 8:53 pm #197344

    Alan Heather
    Member
    BellingenEv wrote:
    Id rather push my WR

    That is an option:woohoo: :laugh: :laugh: ,but how hot did your bike get at bello on the hot day we were out, the other day may have warped the clutch.

    February 26, 2011 at 8:58 pm #197346

    Evan
    Member

    Mackas 06 was there that day too and it still starts Ps Al macka broke his arm that day

    February 26, 2011 at 9:24 pm #197347

    Alan Heather
    Member
    BellingenEv wrote:
    Mackas 06 was there that day too and it still starts Ps Al macka broke his arm that day

    In the creek???

  • Author
    Posts
Log In Register Lost Password
Viewing 15 posts - 1 through 15 (of 35 total)
1 2 3

You must be logged in to reply to this topic.