Go To...

yz 426 hotstart mod

Home › Forums › Yamaha Bikes › Yamaha Bikes › yz 426 hotstart mod

This topic contains 1 reply, has 0 voices, and was last updated by  mark 15 years, 1 month ago.

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 10, 2009 at 8:21 pm #96585

    DAVE PURDOM
    Member

    Ok here goes ….anyone know if its possible to fit a hotstart plunger from a later yz 450 into a 426 carb so i can have a bar mounted hotstart…i know you can buy a kit in the states but with freight its REAL:( expensive
    Here’s hopeing..now back to playing with my sheep;)

    February 18, 2010 at 10:18 am #138975

    mark
    Member

    Hi mate
    I went through the same deal with my wr400 and was told i might be able to fit bits of a wr450
    onto the carb but the cheapest and better option is a Dr D hot start complete assembly.
    look on the Dr D web site.http://www.dubachracing.com/cart/index.php?main_page=product_info&cPath=4&products_id=34 Its one of the best things i put on the bike.
    cheers

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.