Forum Replies Created
-
Murph the surf wrote:
Action in action
Moto, riding Cindytalks bike up, sporting a paint shop helmet. :whistle:New avatar photos for two Old Bulls right there :laugh: :laugh: :laugh:
Adam.
bigger al wrote:Next time you are going for a ride down that way adam i,ll have to tag along if thats ok.No worries Al
You’ll enjoy yourself on the 250
The Ourimbah singles were built for them :woohoo:And it’s bloody hard work peddling a DRZ400 through them :pinch:
I doubt that you’ll miss yours :laugh:
Adam.
Happy Birthday Aaron
Enjoy
Adam.
Krusty wrote:I had a shite morning and could not find any mojo whatsoever… :angry:
Cheers….Krusty it happens
I have days where you know the track and have ridden it dozens of times and still muck up corners or stuff up your timing etc. The worst one that comes to memory for me was Bello Ev’s Lowanna ride. I couldn’t do a thing right :pinch: :whistle: yet other days you can’t do wrong.
Mojo is a funny thing :huh:
Good to have you along
and you certainly got your Mojo back in the arvo :cheer:Adam.
Sifted through the footage and here it is
Trouble with a good pace is there’s no time for stopping and videoing. I guess it’s time for a Gopro or something similar
Chris-t wrote:Going to have to give it a miss tomorrow.My replacement rear lever that was supposed to show up today – didn’t 👿 b#%}^*ds
Enjoy all, have a good one. :pinch:
No worries Chris see you in Coffs
Adam.
Cindytalk wrote:Thanks for the heads up.Is there room on the ride for me to tag along. I wouldn’t want to assume and just turn up.
Many thanks :ohmy:
PM sent
underhonda wrote:Hi Adam,
Did I rename Kevin Trevor give him my apoligies,guess what ? Ismacked the ribs again on Wednesday riding with Kato so Im out for a week .
Cheers Michael.I was tempted to come on Wednesday but had a few things that needed to be done (according to the boss :whistle: )
I guess your out for tomorrow then
And Saturday too :pinch:
Will catch up soon.
Adam.
MARTY 450 wrote:Gday Adam,
Would love to be there mate but will be away.
Keep me posted next time you guys are heading out.Looks like some good country up there.Cheers Marty
No worries Marty will do
Adam.
moto wrote:I live a few hundred metres from the start point and it just started raining!Nothing here in Ourimbah yet
It’s either gone to the north or south of us
Hopefully some in the forest though :dry:
Adam.
Murph the surf wrote:Hey Adam
Is there room for two more?
Cheers
Murph/missing the surf.It won’t be a problem for another two if we get some rain :pinch:
So far it’s missed us here but looks good on the radar :woohoo:
I don’t believe a word the weather forecarster’s say :silly:
Adam.
moto wrote:I have plans this weekend but am still keen for a burn so I might come and maybe bail out early if needed. I know my way round so can get back by myself without drama’sNo worries Moto maybe see you there.
One thing about Ourimbah SF your never too far from home
Adam
Michael posted this video on youtube
I’ve ridden with Michael quite a number of times and where he has his first stack must be his nemesis as I’ve seen him stack there several times :laugh:
And he’s the only person I’ve ever seen stack there :laugh: :laugh:
Trevor must be Kevdogs stage name :laugh:
http://www.youtube.com/watch?v=HILXhclwbI4&feature=youtu.be
Adam.
Trailraider wrote:Hi LC4,
there are some really good Loctite bearing retaining compounds that will take up the difference up to around 1.5mm in diameter. You can use 603 or 609 Loctite for the job.
Judt make sure that is is really clean before you apply it , there is a proper cleaner/primer but brake clean will do the trick.The hub could be welded and re machined but that probably wouldn’t be much cheaper than a new hub if at all.
Plus 1 on this idea. Done this on many a machine to get them going
If there is a fair bit of gap a trick is to centre pop the inside of the hub where the bearing sits. This swells the metal around the pop mark. If you do 4 pops @ 90 degrees to each other you will maintain centre for the bearing and the loctite will do the rest.
Adam.
