[glennMember]

Always garaged and only ridden on sundays?? :whistle: :whistle: :whistle: :whistle: :whistle:

[glennMember]

let me guess????

a bit to wet for earth moving today????????? :whistle: :pinch:

you and pep need a hobbie. 😆

[glennMember]

pay no attention to these peanuts?????

what you need is,

1. 75mil,, inch and a half hardened steel die.

2. A device you can use to provide several short sharp blows with.(ensure this is made of steel)

3.a length of rope,,preferably synthetic and about 8 mil thick.

4. some form of heat source,,hotter the better,,not something like Peps hair dryer,or Aarons curling wand.

1.Place the section of the engine that requires pressing apart on the floor in a clear and ventilated area.

2. heat the section of the engine that requires pressing apart to a tempreture of aprox 150 to 170 degree c.

3. Place the die on the part to be struck.

4. Using the striking tool give that sucker several good hard whacks.it is important to continue doing this as it may be the next whack that loosens the part.

5. Using the 8 mil synthetic rope (and waiting until the engine part cools down) tie it to a section of the engine that required pressing apart , and ensure you use a real good and reliable knot.

6. The end result should be,,,you have just made a pretty darn flash boat anchor,,,now go and buy a new one …it will save you a shirt load of grief.

Boony

Glad to help.

[glennMember]

Aaron wrote:

kram140 wrote:

Is there room for one more on this ride?????

It sounds bigger than Ben Hur :laugh: :laugh:

Menace’s Birthday.

Mal skiing

Riding in the snow

Meeting all the Viccos

Boony being ……well Boony :whistle:

Riding a new area

And I might even visit my folks

Too good to miss I reckon :woohoo:

Kram

any room on the Tamworthian Fun Bus????

Just like Micks ride people will pull out…. Idiots:laugh: I will take my landcruiser or my old mans F250 twincab towing a trailer for the bikes depending on how many people are going. So I would say there probably will be room:unsure: The trailer I had organized could be gone by this ride can everyone keep an eye out for some back up plans. I t will have to be BIG AND ENCLOSED

We need to have a gahtering (preferably at a pub) and start to get organised, if theres 10 of us going we should take our cars and bike trailers?????????

[glennMember]

We`re doing a nundle in july blat as a training run for this trip,,,,fingers crossed for snow.
Not real sure about skiing in the dam???? thats pretty ballsy mal!!!!

[glennMember]

I`de be watching it from now on Al…. :whistle:

[glennMember]

Puddles wrote:

Boony wrote:

reminds me of a certain nundle ride,,,, 30 something keen starter and the 16 die hards actually turn up,

I might be a restarter yet. just waiting on some news (fingers crossed)

come on Boony. grow a pair.:huh:
come over to gods country & have some fun :woohoo:

Hey,,,I wear the pants in this family,

She just tells me what colour to wear 😆 😆 😆

No thats true :S :whistle:

[glennMember]

As all know, I love my DRZ 400, :kiss:
yes it may be heavyer than the high reving, high maintainence 4 strokes around the same CC, :ohmy: but in all honesty, I do not feel the weight now when I`m in the singles and my bike has more than enough power to handle any thing I can throw at it,
No its not a race bred machine nor is it a enduro weapon, but hey I only want to trail ride on it, not win dakar.!

The maintainence of it is easy, and not a chore after every ride, just throw new tyres and occasionally some sprockets and a chain and Bobs ya uncle.

Horses for courses I say,
There will be the advocates out there for the lighter and faster bikes, and theres the one that say DRZs are useless, but its what I own and I love it.

Take the plunge corey,,you can nick parts off your old mans when his not looking.

Boony

[glennMember]

reminds me of a certain nundle ride,,,, 30 something keen starter and the 16 die hards actually turn up,

I might be a restarter yet. just waiting on some news (fingers crossed)

[glennMember]

Hatto wrote:

micknmeld wrote:

PEP wrote:

hay all sorry but lm out due to havin to do a course on sat…have a good ride and catch up with u all soon:P

Not many of the 10 tamworth crew left now!!

SOOKS

Nahh ,, it`s just we want to ride nundle on the sundy,

[glennMember]

you got that right!!!

been there done that…. :S :pinch:

[glennMember]

micknmeld wrote:

Now there is a bolt on hard part that effectively doubles the power of a DRZ :laugh:

your not wrong!!!!! I had to take the battery out if it just so I wouldnt go through the back of the shed when I put it away,….

Your a funny man Mick!!!!! 😆

[glennMember]

Bolls,Bolls,Bolls, what have you done mate??? :ohmy: you know you could have just rang anyone of us if you needed to talk mate. :whistle: not that we would have listened anyway, i spose this ones for doing property inspections on ??? 😆 bit big for mustering.. So do we give you a ring now when we are leaving the forest and youll ride up to the Dungy pud and have a corona with lemon whilst we have a beer as we travel home from TRAIL riding?????? :pinch: :pinch: :pinch: :pinch: :pinch:

anything else you need to come out of the closet about?????????? :blush: :blush: :blush: :blush:

Boony (trail rider) 😆

[glennMember]

BOLLOCKS wrote:

Dont know wether we can get there by 8..let alone be ready by 8 :ohmy:

Cmon Bolls,,,just think :blink: The gunners turned up to 11 ,,the hilux hammering and lifting its wheels through the windies, and all this happening at 02.30 am heading towards an Old Bulls ride…You can do it!!!!! Oh yeah and snowy giving you the eye as he looks at you through the glimmering moon light.

Boony

[glennMember]

snowy09 wrote:

Boony have you screwed that onto your bike? Dont you realise you have to give it back at the end of the year!

There not getting the sprocket back :woohoo: its got 2 good rides left in it, :whistle: :whistle: :whistle: :whistle:

[Author]

Posts