[Nick AgainMember]

Here’s to hoping all you OLD BULLS down in the NTH END of NSW are doing ok… Looks like we got some more coming back up to us this afternoon..Looks like allowing developement in the Land reclaim areas and Flood ways of major rivers is paying dividends????

[Nick AgainMember]

If these bikes are F.I. then the system generally have 2 maps. Open Loop and closed loop. The Huskies have a setup whereby you cahnge the Lambda sensor and fit open pipes, the bike then atuo switches to the race loop. the O2 sensor is the big part in it. A mate of mine has the CRF 450..it too has a wire mod similar to the Yammie.Made a big difference to his CRF. I often wonder if My 610 has the same set up, even though its carb mod. the wiring and Ignition pack is the same as the EURO version which was F.I…If the maps are preprogramed in the CDI part , then it stands to reason that I should be able to do a similar Mod? ( with my great lack of knowledge..I foresee my bike staying as is though)

[Nick AgainMember]

xy-transit wrote:

Quote:

if i lived in the city and had a short commute i’d have a motard in a heartbeat.

i reckon if they had solar charging stations, low or NO rego fees , it would be a winner.

less mid to bigger cars in the cbd. more parking spaces.

hmmm now that’s enough of that!!! i sound like a greeny!

now to knock another baffle out of my muffler:P

Its all on the way. The electric charge grid is being done now by an Aussie consortium..funny how they get to go to Europe and do an install there first. Those Bikes by Zero have a 4hr run time @ 80kph. Dont know about your states but here in QLD we are loosing much to bikes because of NOISE. the area where we hold the Brissy leg of SX/MX Xtreme is not up for renewal to the sport. Means that there is now NO plans for thsi in the Brissy area anymore.BECAUSE OF NOISE. KTM are doing the Christin wheel thingy..2wd bikes in comp. With a spare batt.pack, the Zero can do a hot change quicker than you can refuel…No bike onthe market(dirt) can match the torque they deliver from start of throttle.Wont be long and these will be pushed as the ” motorcycle” of the age(Glob.warm..etc) One group have converted CRF450’s over to Twin elec motors..they run them hard. I’d give one ago tomorrow if they were selling them here. never no if you dont give it a go.

[Nick AgainMember]

xy-transit wrote:

Quote:

Hi All,

i did not want to start a whole new thread.

i went to the local shop just to see what they had to offer for my 640

they recommended the dunlop 606 (something) looked the goods, but?

they wanted $135 fr , $145 r:unsure: + fitting

seems like a bit over inflated if you ask me.

however i just wanted people’s experience, if any with the dunlop 606.

XY Transit..I’m usiing a 606 at present on my Husky…Its definately a slow wear tyre..like the bridgestone shot my Dunie has close to 200 klms a fair amount of that on Bitumen as i dont transit the bike for rides. As for grip…i rate the 952 much better and it was also a slow wear tyre but heaps of hook up.I padi 135 + fitting here in M’Boro qld. I had a MOTOZ before the 606…it had heaps of grip but was like licorice on the oad…very strong cases…i ran 6psi in it at times.(mostly) no rim hits no punctures..pity it didnt last longer..it was a great tyre for most conditions i rode.

[Nick AgainMember]

dont forget to pack your car/Bikes in the BOAT…It appears that Boating is the NEW Car. We had some serious water falling up here during the week..what with NSW being below us, could be some serious liquids heading your way…LOL..I cant get the HUSKY out without destroying the yard..
(sucks ’cause i want my Bond back AND i want to go for a ride)

[Nick AgainMember]

THATS FUNNY !! Sorry but i may have a sic sense of Humour…As for the Emergency crew….what did they think those LATEX gloves were going to do for them? They shoulda smacked her up and down with a stick..gone in 60 sec..then “believe” it or not…rub her down with dirt.

[Nick AgainMember]

Aarochild wrote:

Quote:

thanks fellas ecks and boodey were spot on those were my thoughs too, not my problem and i rolled with it

he lasted 12 hours:ohmy:

no more stress for me, he quit:laugh:

any one know any teens who like pulling tits?:laugh: :laugh::dry:

LOL sorry Aarochild but do you know of ANY Teens that are going to get out of bed at the hour you need them too? Let alone getting them to work after getting them outa bed?..Everything’s Too easy for them today…they can get their “Youth Allowance” too easily, Rather than learn the Attitude of “Work or learn”. Stupid GUV. cant figure it out!

[Nick AgainMember]

Trailboss wrote:

Quote:

No it was + 1 earlier than went to zero then 6 hrs later – 1 two accidents :blink: they can only to it every 6 hrs that is give and take

Doesnt matter I will give them a chance and then find out myself if need to

TB

Ok..I may have jumped the gun here as i havent read all this thread….”Just do it” TB. Then you know who. I’d doubt you’l find out why though…people who slink around like that generally wont come forward and put their hand up mate….I personally havent spent enough time on the site lately due to being Far to busy with life/wife/kids and packing for a move..a quick way to fix it is remove all Karma??

[Nick AgainMember]

menace wrote:

Quote:

im just jokin mate.

i have no kids, no house and few overheads……

and a new kato….

ive ridden shitters all my life till i got the 300.
thats why i love it so much…..

you dont have to justify you little yellow tractor to me buddy.
as long as it makes you smile:) its all good;)

Hey menace..I got 4 kids and their overheads..I just sort of got the Husky in one of those..”Shopping spree thingies that Men DONT go on”…I have had a few bikes I thought were ok..after 15 – 16 yrs of NO bikes then this..it wouldnt matter what your bike brand was..they’d all BLOW the mind in comparison to so many yr ago..My Husky Constantly AMAZES me and near splits my head from GRIN.

[Nick AgainMember]

I think bikes have lost abit in their developement of power delivery…I know that being more linear is better for times…But that Kick…keepinig the bike in that zone..was sorta different..Scary yet fun?? I know my Husky is much more “polite” in its delivery than any bike i had before..15- 16 yr gap in riding…Suspension quality does heaps too.

[Nick AgainMember]

Yeah…I had a 465 for a while, whilst I was in Isa..it cost me 7 offences and front page of the Local..All because it dropped the springs on the expansion/manifold…made heaps of noise going past a “plods” Lodge at around 930 pm…they picked me up hr odd later and went silly…Cost abit.:huh: :huh:

[Nick AgainMember]

singletrackmind wrote:

Quote:

boulder wrote:

Quote:

Congratulations DanD On 500 look forward to the next 500!!

Hey Boulder

I just took a better look at your avatar and it looks like your bike lives in the house. For this I have given you karma.

I have managed to bar cars from my double garage even though I live at the beach and they are slowly rusting into the yard. Moving the bike indoors though is the next level and any advice you have would be appreciated.

STM

He he…mines right out there by the Kitchen…Is locked down each night..dogs stay in the Shed..IMHO..nike have it so right at times..”Just do it”….you may end up outside..the bike wont.:laugh: :laugh: :laugh:

[Nick AgainMember]

All the best Champo..I dont even “Dream” of doing it…Must say though that the Power delivery of the older bikes was something spectacular… I had an 82 CR 250 that was a “delight” to play on..a few Xt 500’s that just loved nothing more than trying to “OWN ” my ankles…I must say the ‘leccy kik’ is way more Polite on my Husky..LOL

[Nick AgainMember]

Boony wrote:

Quote:

menace wrote:

Quote:

short arms… deep pockets:laugh: :laugh:

dont let the moths out boony:laugh: :laugh:

2 tin lids under 6 and just built a house, The DRZ will do me, if you get my drift,

keep the Doctor Boony…I’ve seen plenty of bikes broken…not too many have been Doc’s.

[Nick AgainMember]

I use a 661 pressure suit..its paid for itself already..I wash it after every ride( chuck it in the front loader and onto the line. I dont use the roost plate in it though. I spray Dry glide on the Zip. No probs in 2 yrs.

[Author]

Posts