[BillMember]

Got the Bikes loaded Rats too so there is no way out for him now :laugh:

cya there

[BillMember]

squirrel wrote:

Quote:

whats with these poofs boony & eagle and their bromance I will be at Louee if I see you clowns there & going on with any of that nundle man love shit there will be tears listen you all I have paid my money and will be in the shearers quarters so lets have a ball see you there oh but you wont know its me will you :S

Cant wait to see you there my little mate :laugh:

[BillMember]

Uncle Fester wrote:

Quote:

Boony wrote:

Quote:

I have a tarp, but no poles would that help in any way for the shade,,not for this poofy dressup stuff yous are on about!

You plan on wearing a lovely Roo skin jacket don’t you Boony.

And a sqiza skined and used as a hat :laugh:

[BillMember]

Are you sure you didnt over fill the engine oil as this is the major cause of oil out the breather and easyest fixed There was a wr450 with the same problem here on the weekend

[BillMember]

Glad to be in on it Puds it made my day
got your bike under color change now mate will be orange by friday

[BillMember]

The funny thing about all this is i was showed all this about cooling systems and heaps more about valves, ringstacks ect in 1942 truck and tractor engine manual

as Bruceiee says the more things change the more they stay the same

[BillMember]

Mr Blue wrote:

Quote:

Ok in Daves defence, he and I spoke about it after a week or so of this rubbish, I kept my word on silence and will continue to do so as it is him and Mr Bulls’ intellectual property to a certain degree. I caught on very early as to what they were up to, but only I think because I have had alot to do with “bush mechanics” and veteran engines in my youth. As I keep stating everything old is new again, as for the to and fro’ing a fair bit of pride got mixed up with logic in this arena.
Also remember as with all data, computer analysis is only as good as the program behind it and the data inputed. Also remember a minerals based computer has not been invented that can take the leaps of intuition and logic that the organic computer can.

sometimes the bleedin’ obvious is just that.
and PDS doesn’t work very well either…

Bruce Cee

I started to like you till the end bit :cheer: :laugh: :unsure:

[BillMember]

Without going into very expensive testing there is some cheap and easy tests to do first.

Get a clear bottle and fill it 1/4 with mixed coolant as you would use it and shake if there is foam after it probably wont be suitable to run through a water pump as it will cause cavitation.

Get a 1.25L cola bottle and cut the bottom off it and push a 1m piece of 5/8 heater hose into the neck of the bottle. Remove the top radiator hose and fit the other end of the funnel to the top radiator or the y piece suppling the top of the radiators. With another piece of 5/8 hose install onto coolant outlet on the cylinder head putting other end into funnel. Fill the system and start motor you can check the flow and signs of bubbles or cavitation. You can also check pump pressure at idle by lifting the hose up from the funnel till the flow stalls.
21 inches of water column = 1psi.

To check the system under pressure you can get some heat proof tubing and fit it in line top and bottom hoses and exit from water pump.

There are several ways to check temp. the heat stickers are fairly accurate and dont need to drill holes for thermocouples but they are the most accurate.

I would be more than happy to discuss this with anyone at Louee as long as you buy the rums while i talk :laugh:

[BillMember]

cant wait to see the kids all on the track

[BillMember]

thanks TB iv missed being here and i like the new look to the site although its probably not that new now.

[BillMember]

What is this green slime stuff cost

[BillMember]

Mr Blue wrote:

Quote:

May I ask on the subject of retards, do they use any old carcass that comes along or do they use particular brands for retarding?

Just wondering cause if I have a retread remoulded out of say a Carlsbad with stiff sidewalls and it doesn’t grip, then Ollie gets one remoulded out of a Dunlop 736 and his works well wouldn’t that play an important part in rider evaluation?

Bruce C

Yes it will and i think ollies brand only uses some brand cases and also have to run a lot less air pressure but am only new to them there very hard feels like there is 10 psi in them off the rim

[BillMember]

Puddles wrote:

Quote:

I think you all need to go & wipe your mouths it looks like you all have been dribbling a lot of crap today

Thats rough comeing from a bloke who gets paid to dribble shit:huh:

[BillMember]

Trailboss wrote:

Quote:

Why wont I have fun on the piss Bull?

TB

You may but im not you so how could i say:laugh: :laugh:

[BillMember]

Trailboss wrote:

Quote:

Bull thats like a repeat of what I said the post before, look you stay here and play, no point me coming to a battle of wits if you are unarmed :laugh: :laugh: :laugh: :laugh: Maybe Ollie can supply you some more cue cards :laugh:

Sorry Bull its all good, have a great day mate, will get on the piss at the xmas party champ

TB

]
Sure you did only prob i havent seen it or anyone else

Always haveing a good day

on the piss will be fun fun fun :laugh: :laugh: for me:P

[Author]

Posts