David

Forum Replies Created

Viewing 15 posts - 1,306 through 1,320 (of 1,801 total)
  • Author
    Posts
  • in reply to: HVMCC Pony Express #120835

    David
    Member

    Iron man and Nothing else for me, no one else to blame but yourself as well:laugh: :laugh: :laugh:

    in reply to: HVMCC Pony Express #120831

    David
    Member

    TB if I can get someone to officiate for me I am in

    in reply to: new bike #120823

    David
    Member

    Yes moto, but he rode blue for a while(more than 10 mins is enough) and he is sure to have hit his head, is a shame really, but they are good fodder to play with:laugh: :laugh: :laugh:

    in reply to: HVMCC Pony Express #120793

    David
    Member

    Trailboss wrote:

    Quote:
    Hey Crash I am going to Coffs Harbour the weekend before for a ride up there that is yet to be posted, I finish training at Coffs on the friday and would be interested in the pony express in the same class as Mick and Moose although maybe the iron man class with Lurch.

    Mick can we get a day licence?

    Hey Mick why dont we all iron man?

    TB

    Boys you can get one day licenses for $55 and then you can get one day memberships for $10, then you need to pay the race fees for the day and I think they are around the $25-$30 mark, the guys who have road licenses will not have to do a ride test, but those who dont will have to do them(with me as the assessor), all who get a day license will have to do a 25 question multiple choice knowledge test(and I will have the answers on display for a small fee), when you have finished all that you are ready to roll, and I say you all dont have an idea how rough and tight it will suddenly become around the 3 hour mark and it takes some insanity to still push in the last hour……………BRING ON THE HONDA BOYS.

    Anyone wanting to know more just ask

    in reply to: KTM….I can not believe this #120735

    David
    Member

    GL puddles wrote:

    Quote:
    micknmeld wrote:

    Quote:
    GL puddles wrote:

    Quote:
    micknmeld wrote:

    Quote:
    Half way back from Hill End I was wishing it was my bike that had the end float, so I could ride in the car…LOL

    Puddles I will remember that “nothing nice ride about Honda riders” statement when the WR gives you some grief out in the bush…LOL

    The way things are going for me it will be along time before the WR comes out of the shed again. :S
    So for now I have to spend my time here giving Honda riders a hard time & when you think about it it’s not that hard to do LOL.:laugh: 😆

    Next time you come out with us Puddles I will put a brand new Knobbie on the Big Red Pig, just for you.:laugh:

    you’ve been promising that new back tyre for a while now so I don’t think there is much for me to worry about & besides that you need to be infront of me to be able to roost me:laugh: :laugh: 👿

    Puddles go wipe the mouth, you will attract flies:kiss: :kiss: :kiss: :laugh: :laugh:

    in reply to: KTM….I can not believe this #120731

    David
    Member

    watch out for the thread killerB) :angry: :angry:

    in reply to: HVMCC Pony Express #120726

    David
    Member

    micknmeld wrote:

    Quote:
    Ha, it looks like we have the makings of Team Old Bull.It will be a blast.Dave, you guys will be in the masters too, won’t you?
    Actually does Bill qualify as a master?

    Yes Bill is a Master(blaster), but I am worried about his lap ratio scheme, he wants me to do 25 laps to his one, in a 8-12 lap event I am confused;) :P :dry: :huh:

    in reply to: HVMCC Pony Express #120719

    David
    Member

    If I can get someone to officiate on my behalf for the sunday, I am going to team with Lurch on his bike cause he wont let me use Betty, he says I will fall off, I dont see the difference, I will fall off his just the same:laugh: :laugh:

    in reply to: KTM….I can not believe this #120717

    David
    Member

    Mr Blue wrote:

    Quote:
    I once had an IT175H that ran with no discernable compression at all, you had to run start it and the end gap was measured in imperial eigths of inch, and where paper thin when I pulled it down, new kellogs base gasket new rings in it and sold it to a school mate for $250 he rode it for ages before the crank bearings failed after a extended drowning.

    Mr Rat I have an ’06 pro-senior here that destroys starter gears and clutches like u would not believe, despite junior not blipping and being on it as much as any 8 yr old I’ve ever seen can, yet his KX just takes petrol and a bigger flogging every weekend, admittedly the KTM goes like a whippet on amphetamines, so is ours a friday afternoon version?

    BTW his other pro-senior was a pearler and his old MA50 was a dream but both of them kicked him around on small sharp stutters.

    BTW Mr Rat orange blinkers are dangerous accessories from the hard parts catalog and should not be used under any circumstances, they rob your wallet, blind you and keep you emotionally stunted :P . funnily enough they are very popular in Australia

    Mr BLUE

    Can anyone answer me who was the “Flying Freckle”
    Hint it is KTM related

    Jeff Leisk. easy capesi

    in reply to: KTM….I can not believe this #120704

    David
    Member

    KTM Bull wrote:

    Quote:
    Ktmrat wrote:

    Quote:
    You Honda riders are so far up yourselves you missed the point, Man a KTM still running with the ring end gap from hell !!!!!.

    And TB as far as me not knowing how to measure, I used 4 1/2 dead fleas that I lined up and that equates to 4.5 mm… At least I didnt use the thumbnail like normal

    and Mick the bikes you sold , you did not say anything about them being sold to deaf , dumb and blind people, They wont wear them out will they

    So once again for the Honda riders………..4.5 mmm gap and still started…..I challenge any Honda to that….I might get to Bull’s Ranch and get one of his Z’s out and do the same to it ring end gap, I bet it wont start…..
    So do you guys see what I am saying now……4.5 mmm and started:laugh: :laugh: :P

    Rat you know Honda motto “if it dosnt touch it wont wear”

    :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:

    Fell off the chair

    in reply to: Toys I’ve bought with out telling the missus! #120690

    David
    Member

    Tb I never used to worry about boots until we had to do a retrieval mission with a mate that had a log through his boot and foot, Alpinestars and Gearnes are the only ones that have a metal plate in the sole…….after carrying my mate with an ugly foot I have worn the Stars since….it usually takes a personal experience to change ones perspective

    in reply to: KTM….I can not believe this #120695

    David
    Member

    You Honda riders are so far up yourselves you missed the point, Man a KTM still running with the ring end gap from hell !!!!!.

    And TB as far as me not knowing how to measure, I used 4 1/2 dead fleas that I lined up and that equates to 4.5 mm… At least I didnt use the thumbnail like normal

    and Mick the bikes you sold , you did not say anything about them being sold to deaf , dumb and blind people, They wont wear them out will they

    So once again for the Honda riders………..4.5 mmm gap and still started…..I challenge any Honda to that….I might get to Bull’s Ranch and get one of his Z’s out and do the same to it ring end gap, I bet it wont start…..
    So do you guys see what I am saying now……4.5 mmm and started:laugh: :laugh: :P

    in reply to: KTM….I can not believe this #120671

    David
    Member

    Not a bite from the nameless one, he must be asleep

    in reply to: Tyre size in relation to top speed + wr250 #120678

    David
    Member

    Tyre size(130 compared to a 110) will only effect speed in a minor way, change the rear to a 48 and see what goes:laugh: :) :P

    in reply to: Still Looking #119441

    David
    Member

    woof woof….come on find me already will you
    Still looking any one find my mate yet

Viewing 15 posts - 1,306 through 1,320 (of 1,801 total)