Geoff Forshaw

Forum Replies Created

Viewing 15 posts - 751 through 765 (of 926 total)
  • Author
    Posts
  • in reply to: Coffs 2011 ride report. #212289

    Thanks STM and Nick J for a great ride and weekend. :woohoo: :woohoo:

    I must apologise to everone who rode yesterday for the hold up as my bike wouldn’t start. :blush: Found the problem and we were back on our way albeit with a route change. :huh: Sorry Scotty.

    But in typical OBT style it was not a problem. ;)

    Thanks again and I can’t wait for the next one. :woohoo:

    Cheers,

    Lefty

    in reply to: KTM 500 steering/tracking problems #212114

    Hey Murph,
    I had steering issues with my 2008 KTM 450 as in dicated in a previous thread. The biggest problem that i had was that i rode a mates 2010 Husaberg. Shit they turn well!. So i went down and spoke to the guys at Tekniks and after spending a bit of coin I went to a progressive rate rear spring and revalved the front fork with a new piston and shim kit. I run my forks about 8mm through the triple clamps and was advised to run an air chamber height of 145mm and let the shims do the work in the fork. I was also advised to run the rider sag at 113-118mm using the progressive rate rear spring. My first ride with this set up will be at Coffs on the weekend so i will let you know how it goes.
    I am also using Pirelli Scorpion MX Extra’s Front and Rear.
    Clickers are back to Std but I will have a play up there.

    PS; Dont ride a Berg eh! You will be really Pissed then! :huh:

    Cheers,
    Lefty

    in reply to: FunnelWeb Air Filters #212059

    Hey Chris,
    They look the goods! ;)

    Please give me a call. I PM’ed you yesterday and have called you earlier last week but no reply.

    Cheers,
    Lefty

    in reply to: 690R Radiator Thermo Fan Mod #211872
    Trailboss wrote:
    Needs to be pretty close Eags to allow suction mate. If there is to much gap the fan will pull air through the gap not the radiator. A strip of soft rubber or foam will give it a perfect seal make the fan more efficient and not wear the radiator

    TB

    Absolutely TB! It is very important as the air will take the path of least resistance.

    in reply to: Long Range Fuel Tank #211230

    Hey Justo, it looks the goods champ! However i am after a 21.5ltr unit.

    Cheers,
    Lefty

    in reply to: Blaxland, Wauchope, Nundle and back 3 days 1400kms #211223

    Yeah it was bloody awesome. :woohoo: I can’t wait for the next one. I think the unknown is what makes it and having to deal with the conditions as they arise. ;)

    in reply to: Blaxland, Wauchope, Nundle and back 3 days 1400kms #211078

    We got back to Blaxland at around 8PM all in tact. Thanks to everyone for a great weekend it was bloody awesome! :woohoo:

    Well that mother of a hill was conquered by all (Down anyway!) It was pissing down so TB asked me to do a Recce. :ohmy: I went down the only problem was there was no way of letting the boys know that it was ok to come down. So the only way of telling the boys was to have a crack at getting back up. :huh: So I gave it a shot and made it 3/4 of the way back up to let the boys know that it was ok. Bloody tough though :blink: :blink: Some great hardcore ADV riding!
    I also managed to demonstrate to Micknmeld how to crash safely at 60km through a slippery concrete causeway. Bugger me It felt like a long crash. 😆 😆 :silly: :silly:

    Cheers the Leftone,

    Pics to follow later ;)

    in reply to: Blaxland, Wauchope, Nundle and back 3 days 1400kms #211028

    :woohoo: :woohoo: All packed, pumped and ready to go! See ya at 6.30am TB. :huh:

    Cheers,
    Lefty

    [attachment=2922]2011-10-27_21-44-11_620.jpg[/attachment]

    in reply to: CPW Oil Cooler/Reservior for KTM EXC #210704

    :laugh: :laugh: :laugh: No But I wish it did Crash! ;) Actually for the price it should have come with a pole dancer and a polish!

    in reply to: CPW Oil Cooler/Reservior for KTM EXC #210679

    Now with Enduro Engineering Aluminium Guard fitted to protect oil fittings at the bottom which could easily be damaged if not protected. B)

    [attachment=2910]2011-10-22_14-27-40_115.jpg[/attachment]

    in reply to: CPW Oil Cooler/Reservior for KTM EXC #210669

    Yeah, I agree thanks Eags. :laugh: :laugh:

    in reply to: CPW Oil Cooler/Reservior for KTM EXC #210665

    It also includes a case saver which goes over the top of the clutch slave cylinder. Unfortunately CPW were out of stock of these so i should have it next week. This gives the cooler 4 mounting points.

    in reply to: 2011 OBT Christmas party ride weekend Nundle #210623
    Trailboss wrote:
    Hey Bollocks, Lefty has converted his bloody KTM 450 to a ADV bike or like one :laugh: (bring a tow rope) So he and I will be doing the ride ADV style to Wauchope on the Friday and coming over with these clowns (no offence Moose and Strucky :P Oh and Toes :laugh: ) so put as down for ADV, I am trying to talk another in if he can get he kegs back of his bride :pinch:

    Shed party Micks Friday night, hang over ride saturday Mick ;)

    TB

    :laugh: :laugh: :laugh: Can’t wait! We’ll see how she goes eh! ;)

    in reply to: Silverton, Oodnadatta, SA ride report 2011 #210603

    Great report gents! I need to come on the next one. Looks and sounds like you guys had a blast! ;)

    Cheers,

    Lefty

    in reply to: Taken for a ride. Not a good ride though. #210568

    Great job there Mick. Well done mate. ;)

    Talk about a load tho!!!!!

    Bloody crazy Pommie. 😆 😆

    Cheers,

    Lefty

Viewing 15 posts - 751 through 765 (of 926 total)