doug

Forum Replies Created

Viewing 11 posts - 31 through 41 (of 41 total)
  • Author
    Posts
  • in reply to: 38mm Mikuni jetting on XR600 #159205

    doug
    Member

    well i put the 190 back in and started with the clip at the top and tried all clip positions still not working so i tried all of the jets and no change :angry:

    a bit more on what is happening the bike will start 1or 2 kick always and idol good will run well even at WOT but if you ride it and start giving it a good bit of 1/2 to full throttle for no more than 30-40 seconds it will die like it just ran out of fuel and then stall but will start first kick so i dont think that it is the jetting :unsure:

    what do you guys think it could be

    in reply to: 38mm Mikuni jetting on XR600 #159173

    doug
    Member

    Thanks for your help Mick and TB the only jets i have are 190,230,250 so thats all i can play with for now and the pilot jet is 12.5 so i will go back to the 190 and change the clip position it is on 3 from the top now wish me luck

    in reply to: 38mm Mikuni jetting on XR600 #159155

    doug
    Member

    it did have that is gone now

    well i just got back from a arvo ride not happy :angry: good down low but if i start giving it lots of 1/2 to 3/4 it will bog and i have to back off an clutch in and free rev it to stop it. So I need some help here to fix it or it will be up for sale and back to ome carby it was ok thought the Mikuni would be better not that i can see yet :angry:

    in reply to: 38mm Mikuni jetting on XR600 #159031

    doug
    Member

    well i just got some jet i ordered they were 230 and 250 main so i put the 230 in to start well after some playing with idol and fuel screw is running tops reving clean and smooth no flat spot :) so it is of to take it for a test ride fingers crossed :unsure: it stays like that at WOT

    in reply to: 38mm Mikuni jetting on XR600 #159023

    doug
    Member

    mite have to raid the kids bikes to get some of them 😆

    in reply to: 38mm Mikuni jetting on XR600 #159001

    doug
    Member

    Thanks micknmeld B) need to get me one of those Old Bull Guard stickers how much more Hp did it give you??? :laugh:

    in reply to: 38mm Mikuni jetting on XR600 #158980

    doug
    Member

    no air box mods or after market air cleaner

    in reply to: 38mm Mikuni jetting on XR600 #158976

    doug
    Member

    thanks micknmeld what mods did you have done besides the 630 kit

    in reply to: XR400 bits #158321

    doug
    Member

    one caliper sold to Trailboss cheers

    come on guys could get a bargain here

    in reply to: Explain your user name #157767

    doug
    Member

    well not to hard to work mine out madougxr madoug witch is my cars personalised plate and i ride an xr600 boring really

    in reply to: Another one from the west of Melbourne #158128

    doug
    Member

    thanks for the welcome guys

    hope to get my bike registered soon so i can meet up with you guys and hit the trails

Viewing 11 posts - 31 through 41 (of 41 total)