murph the surf

Forum Replies Created

Viewing 15 posts - 2,581 through 2,595 (of 3,212 total)
  • Author
    Posts
  • in reply to: buttaba local ride #176389

    Thanks all for coming along and sharing our snottier tracks of the area :woohoo:
    Day started off with our brand new single :woohoo: I had one go at the widow maker and just missed out :( Tim had his first attempt and launched a little too hard at the step and landed in a tree :ohmy: :woohoo: and flipped it right at the top on his second go but that was close enough to get over the lip. Gili was the only other rider to have a go and I think he nailed it on his second or third attempt :woohoo: (No beers needed to be handed out at the end of the day as no one did it one go) Myself and the other boys took the softer option which still reaked a bit of havock :ohmy:
    Traveled out under the train tunnel and did the singles around Awaba, then up and over the hill where we watched the kids go around West Lakes Moto track on their 65’s.
    Will have to write the rest when I get a chance as work SUX
    Cheers
    Murph

    in reply to: Local run from Buttaba Sunday18-4-10 #176348

    No worries Wikd
    Maybe next time mate

    And then there was seven ;)

    Cheers
    Murph

    in reply to: Local run from Buttaba Sunday18-4-10 #176305

    All is good then, except for my back :angry: Spent a lot of the day laying down. Will just have to chew panadols all day tomorrow as I’m keen as mustard to get out for a ride :woohoo:

    Just finished putting a new swing arm to shocky bush in Tims bike and we changed the leaky fork seal in mine (also replaced the bushes this time) So I hope that stops the bugger from leaking ;)

    Don’t forget to bring money for food and petrol. Any 2 bangers coming along don’t forget your oil B)

    Ready to ride by 8:30

    Cheers
    Murph

    in reply to: Local run from Buttaba Sunday18-4-10 #176294

    Perfect day for it Mal
    Take care on the black stuff mate
    Have a good one :)
    Cheers
    Murph

    in reply to: Dilbert gets a job at BMW! #176286

    Youse are a bunch of silly bastards :laugh:
    Mal told me his next bike was going to be a KTM :woohoo:
    Tell them the truth Mal ;) :laugh: :laugh:
    Cheers
    Murph

    in reply to: DIY Fork seals – Husaberg, KTM #176289

    Well done Ripnshred, you can come and do mine now :laugh: :laugh:
    Just joking but I was thinking of changing the left seal today before our ride tomorrow. I have done them a number of times and have even gone to extent of making the split slide hammer tool for replacing the bush and seal. Also have an oil level gauge made out of a squirty bottle with a long tube connected. Works a treat :woohoo:
    Cheers
    Murph

    in reply to: Local run from Buttaba Sunday18-4-10 #176287

    I think this is the phone number to the Husky dealer at Morriset 49733150.

    in reply to: Local run from Buttaba Sunday18-4-10 #176282

    Doesn’t sound good Huskybloke :(
    We have Husky dealer just down the road at Morriset. Can I help in any way??? Maybe I could check and see if they have one??? What model and size is she??? Let me know, only to happy to help out :)

    On another note I will shout a beer at the end of the ride to anyone who can top out on our little widow maker on their first attempt :woohoo: :woohoo: I won’t say how many times Tim and I had a go at it before we nailed it :silly: ;) We have made an easier route up the hill for those who are not as keen :) Just a little warning that the easier version pops out pretty close to Wangi Rd, so be careful :ohmy: :woohoo: :woohoo:

    Hoping my back will improve after another nights sleep (still aching a bit) All will be good :woohoo:

    Cheers
    Murph

    in reply to: Local run from Buttaba Sunday18-4-10 #176199

    Mission accomplished :)
    Amazon has been restored to its natural glory and we have finished our new local single with a widow maker at the end as it pops up onto Wangi Rd. Haven’t ridden the last section yet :unsure: should be interesting :silly: :ohmy:
    Bloody strained my back shifting rocks :angry: :angry:
    Might have a little rest then go and see if the little widow maker is makeable :woohoo: :woohoo:
    Cheers
    Murph

    in reply to: Local run from Buttaba Sunday18-4-10 #176188

    You’ll be right Huskybloke, Tim and I are about to leave now to do a bit of work on the Amazon track. Just going to fill in a couple of undercut steps that need fixing after I trenched them on the 525. Won’t make it too easy though, that would take all the fun out of it. :woohoo:

    Dan, we might even seeya before the Gap mate as we will be doing a lot of tracks out towards your way in the morning. Seeya if we seeya :blink:

    Too bad Diddel, maybe next time mate :(

    Cheers
    Murph

    in reply to: Arcadia Vale to the watagans and back- MAY 2– SUN #176192

    Aha, kept that quite Morgo
    Another year older old man :laugh: :laugh:
    Tim and I are going up to do a bit of repair work to the Amazon track today ;) Well that was the plan, if I can get him out of bed, he didn’t get home until 3:40 this morning :angry:
    Cheers
    Murph

    in reply to: Local run from Buttaba Sunday18-4-10 #176169

    Sounds good Huskybloke :) Will decide on parking option pending more starters

    Eags, hope to be up at the Gap about 11:00 but its hard to judge as you never know what happens out on the tracks :blink:

    Cheers
    Murph

    in reply to: Wheelbarrow Ridge Loop Ride #176147

    Looks like a great day was had :)
    That Champo character sure looks familar ;)
    Say G-day to him from me next time ya see him Mudrat
    Cheers
    Murph the surf

    in reply to: Local run from Buttaba Sunday18-4-10 #176158

    No worries Huskybloke :)
    How many were you talking about mate? Will they be travelling with you or in seperate vehicles? Only asking as if we get too many cars to park in my street I might get everybody to gear up around the corner at a small grassy park :)
    Looking forward to it :woohoo:
    Cheers
    Murph

    in reply to: Broken Axel #176138

    Bloody hell Axel
    That is a long time to go without a ride ;)
    Glad to hear you have been busy though.
    What model Patrol is she mate and what mods have you done?
    Cheers
    Murph

Viewing 15 posts - 2,581 through 2,595 (of 3,212 total)