[DeanMember]

TrailBoss wrote:

Ollie wrote:

You could use a 14mm Hex bolt with a couple of Lock nuts. I have used similar for the front wheel of my gasser :laugh:

Ollie

Tried that Ollie with up to 3 nuts etc. Bent the spanner tightening the nuts even and the thing still turned :huh: . I will weld the nuts and spin them on the lathe at work

TB

If you have access to a welder and a Lathe even better

Ps I dont mind indulging in the old Strongbows Myself 👿

Ollie

[DeanMember]

You could use a 14mm Hex bolt with a couple of Lock nuts. I have used similar for the front wheel of my gasser :laugh:

Ollie

[DeanMember]

white rocket wrote:

realy ollie its not like you to want something for free :woohoo: :woohoo: :woohoo: :woohoo: but why not

Piss Off Rocket :laugh: it appears that you actually have gotten more free stuff than me, actually I havnt received anything yet

Anyway TB I could really use them.

Thanks mate

Ollie

[DeanMember]

Hey TB, Id be up for the Fence stuff Just so happens Im going thru a little fencing Dilemma with my rental at the moment.

Ollie

[DeanMember]

G Mac wrote:

Ollie,
That run from the creek up was good, :cheer: after the tree (which also saw me drop my bike) :blush: was great fun :woohoo: just kept punching up the hill harder and harder…. The T intersection seemed to come out of no where :ohmy: good finish to a snotty section. :cheer:
Think next time you can’t remember why you haven’t done a track for four years, It was probably because you

Wanted to forget………

Cheers Gordo

Oh yeah, Thanks for reminding Me :laugh:

Ollie

[DeanMember]

How Good was the track coming out of Bee camp :woohoo: (Middle Ridge Rd I think its called) Except the bit where I got stuck on the rock after the fallen tree :laugh:

Ollie

[DeanMember]

You Know its Steep and Slippery when Murph has to Bulldog his Bike down :woohoo:

Thanks for the help Gordo

Ollie

[DeanMember]

Geez Louise !!! I am fricken sore today :laugh: I think I fell off about 5 times going down Bee camp !! Twice over the Bars !! First was the Log at the top with a Gumby Moment and the second when we were on our way out and a vine got caught around the peg and straight over right infront of Tim! :laugh: :laugh: Thanks Gordo for organising and Adam for leading and the lend of the safety specs,big Murph for sweeping and just for being there. Great to meet all the other guys as well Michael, Stu,DAn Anton and Polly on the new KTM We are blessed to have quality ride areas like we do on our door step. I promise I willNEVER ever go down Bee camp again :laugh: :laugh: Till next time in about 6 months for me

Ollie

PS A huge thanks for Tim for helping the way he did, a great young fella and can ride !! My promise of my shout at a pub still stands.

[DeanMember]

Bring Salt !! Leeches are thick as 1 Adam got one and I had one nearly crawl into my helmet, saw him about an inch from my eye ! Pulled another off my leg back at the cars fully engorged with blood (still itching like hell :laugh: )

Pikey if you want an early out escape I could go with you as I have some work to do on my rental after the ride.

Ollie

[DeanMember]

Welcome to the site mate ! a lot of good fella’s down your way A few ADV rides coming up, but not sure about your area,ya might have to travel. Have fun and watch out for the Looneys. :laugh:

Ollie

[DeanMember]

Adam and I did a bit of a Pre-run and track clearing exercise yesterday. The Watties are very wet at the moment, Saturday should be perfect This will be a good ride to be on :woohoo:

Ollie

[DeanMember]

Boony wrote:

Hey nipples, I rode one of those to 180 ks north west of Bourne on the scrapheap challenge. Had to adjust the chain at gilgandra and that was all it needs. Bloody good on fuel to. Be good to have a twin on this years challenge ride.

Boony

Hey Boonster, That was the intention for me as well. but work has got in the way and I will be bobbing around in the pacific ocean somewhere. You should buy it and start an XR500 collection :laugh:

Ollie

[DeanMember]

toes wrote:

look good mate,you should get it going,and do a ride,great fun

mate you have not been stowed in a shed.clip looks like you have been locked in the good paddock .

toes

:laugh: :laugh: Thanks Toes yes mate a very good Paddock :laugh:
PS I have another scrapper if I need it

Ollie

[DeanMember]

storky wrote:

I have been looking for an 82 but this one is later

I think its an 82, just has a disk front brake. The 83’s came out with the newer RFVC head, this is the older version.

Ollie

[DeanMember]

snowy09 wrote:

Great work thanks Olie. Shouldnt you have left by now, or is your ship broken again?

Last week of leave

ship sails shortly for 3 months

Ollie

[Author]

Posts